07-31-2006 06:39 AM
Hi,
Anyone know if a routed port on a NM-16ESW supports netflow? Does someone out there have one and could do a "ip route-cache ?"
many thanks,
Andrew.
08-02-2006 06:56 AM
i cannot find anything that states netflow cannot capture statistics, etc from nm-16esw.
i'd guess that if your topology uses the nm-16esw, netflow should see this and report on any traffic, etc. to/from the ports of this device.
08-10-2006 11:33 PM
Yes it does -
12.3(14)T
interface FastEthernet0/15
no switchport
ip address 192.168.201.205 255.255.255.0
ip flow ingress
ip flow egress
ip nbar protocol-discovery
diffserv cops
random-detect dscp-based
end
Router#show run interface fastEthernet 0/7
Building configuration...
Current configuration : 138 bytes
!
interface FastEthernet0/7
no switchport
ip address 192.168.1.1 255.255.255.0
ip route-cache same-interface
ip route-cache flow
end
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide