08-21-2019 08:57 PM
I have N9K-C93180YC-EX with NXOS-703I7.1 installed. How can I change the image with ACI-N9KDK9-12.2A without APIC? Do I need license for this?
Thanks,
Arnold
Solved! Go to Solution.
10-02-2019 04:36 AM - edited 10-02-2019 04:41 AM
If you have access to the "ACI-N9KDK9-12.2A" image you want to boot from, the process for converting to ACI mode is pretty well outlined in this document:
When the new Leaf comes up, it will provide a terminal message similar to the attached image.
From here, you will need an APIC to configure/manage the device.
Hope this helps!
Cheers,
Brendan M
10-02-2019 04:36 AM - edited 10-02-2019 04:41 AM
If you have access to the "ACI-N9KDK9-12.2A" image you want to boot from, the process for converting to ACI mode is pretty well outlined in this document:
When the new Leaf comes up, it will provide a terminal message similar to the attached image.
From here, you will need an APIC to configure/manage the device.
Hope this helps!
Cheers,
Brendan M
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide