04-26-2017 04:40 PM
Good evening,
I've a problem with the Server CISCO C220 M4.
http://www.cisco.com/c/en/us/products/servers-unified-computing/ucs-c220-m4-rack-server/index.html
The 6 FAN on the motherboard don't work and the temperature is too high. The LED blinking in the face of server. I think that the FAN controller is dead, the CIMC SENSOR tells me that the fans are not working.
I've change all the FAN but the problem has not disappeared.
Two question :
Any solution for launch the FAN ?
I've the same server, it's possible to put the RAID5 - HDD to the new server without data loss or break the RAID ?
Out of order Server ---> RAID 5 HDD ---> new server ?
Thanks o lot for your answer.
Mr VOIRIOT Frédéric.
Solved! Go to Solution.
04-27-2017 03:49 AM
Hi Frederic,
Regarding Moving the drives and RAID controller to a different server, it is possible and you can check the following post for details
https://supportforums.cisco.com/discussion/11766596/moving-raid-different-server
Manish
- Do rate helpful posts -
04-27-2017 03:49 AM
Hi Frederic,
Regarding Moving the drives and RAID controller to a different server, it is possible and you can check the following post for details
https://supportforums.cisco.com/discussion/11766596/moving-raid-different-server
Manish
- Do rate helpful posts -
04-28-2017 12:18 PM
Thanks a lot Manish !! all is ok.
but for information i must configure boot in the bios.
1 - go to option boot in the bios
2 - add new boot
3 - give a name + uefi way to boot
For me the way is :
<..>
<Microsof>
<Boot>
|____Boot64x.uefi
05-12-2019 01:11 AM
Hi,
my M4 server stop all fans too, what you do to fix that?
Regards,
Luis
04-09-2020 10:15 PM
Did you find a solution to your issue? I am facing the same problem. All of the fans just stopped working.
06-10-2020 09:24 AM
I just had 2 servers C220-M4S that ALL the fans died in both servers, we took them out, they seem to spin freely, so maybe something has to do with the controller? Anyone find any solutions, or is the solution to replace the entire server????
08-22-2020 04:01 AM
One of our C220-M4 is also suffering of all FANs down. We have a case opened with Cisco.
What about the fix to solve your probs ?
Thanks !
TH
05-17-2021 06:20 AM
Good morning friend. I would like to know if the TAC can solve your problem with stopped fans. Thank you for your attention.
05-17-2021 06:42 AM
05-17-2021 08:00 AM
Thank you very much for the information. I'm going to contact the TAC to see if the warranty applies. regards
05-14-2021 07:18 AM
Good morning friend. I have the same problem as 3 C220 M4 servers. Which all 6 fans stopped. Update to the latest version of BIOS and CIMC ucs-c220m4-huu-4.1.2f.iso. I hope you have some information. Thanks
09-10-2021 10:03 AM
Are you saying that your problem was resolved by upgrading to 4.1.2f? I just had another server do the same and it was already running on 4.1.2f
09-11-2021 01:33 AM
09-12-2021 12:20 PM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide