10-30-2015 11:18 AM
Hello everybody, I am a new Networking administrator.
I have two servers inside my network and I want each to have a public IP address outside my border router, it is something like:
Private IP address Public IP address
Server-1 192.168.0.1 190.100.100.1
Server-2 192.168.0.2 190.100.100.2
But my problem is that I only have one router with only one interface available, and it only allows me to configure one public IP address.
I tried the following configuration using NAT.
interface GigabitEthernet0/1
ip address 192.168.0.254 255.255.255.0
ip nat inside
interface GigabitEthernet0/2
ip address 190.100.100.3 255.255.255.248
ip nat outside
ip nat inside source static 192.168.0.1 190.100.100.1
ip nat inside source static 192.168.0.2 190.100.100.2
ip route 0.0.0.0 0.0.0.0 192 190.100.100.6 (public ip pool gateway)
But no success, from internet I can ping to 190.100.100.3, routers public ip address, but I can't reach 190.100.100.1 or .2
Please, help
Regards
Sergio
10-31-2015 02:09 AM
Hi Sergio,
What is the output for show ip nat transalation ?
-GI
11-03-2015 08:07 AM
Hello Ganesh and thanks for the response:
This is what I get after sh ip nat translations:
Pro Inside global Inside local Outside local Outside global
udp 190.100.100.1:51906 192.168.0.1:51906 125.90.93.203:9800 125.90.93.203:9800
udp 190.100.100.1:59189 192.168.0.1:59189 10.7.1.137:53 10.7.1.137:53
udp 190.100.100.1:59189 192.168.0.1:59189 200.87.100.40:53 200.87.100.40:53
udp 190.100.100.2:61297 192.168.0.2:61297 10.7.1.137:53 10.7.1.137:53
udp 190.100.100.2:61297 192.168.0.2:61297 200.87.100.40:53 200.87.100.40:53
After I ping my servers from internet it´s still the same, I recognize that 200.87.100.40 is our ISP dns
Thanks again and regards
Sergio
11-09-2015 08:21 AM
Hello Everyone:
I find out that FORTIGATE has virtual IP to achive what I need but I cannot find anything about virtual IP in Cisco Routers, Is there something alike?
Regards
Sergio
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide