cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

838
Views
0
Helpful
3
Replies
HrvojeStargl
Beginner

UCS 6120xp fabric interconnect power supply

Hi guys,

 

I have Cisco UCS 6120xp fabric interconnect, with two N10-PAC1-550W power supplies.One power supply is dead.

Power supply N10-PAC1-550W is EoS, and the replacement is UCS-PSU-6296UP-AC.

 

Will fabric interconnect work with mix of those two power supplies? Anyone have situation like that?

 

Thanks in advance.

1 ACCEPTED SOLUTION

Accepted Solutions
Keny Perez
Collaborator

According to: http://www.cisco.com/c/en/us/products/collateral/servers-unified-computing/ucs-6100-series-fabric-interconnects/eol_c51-709473.html ; : N10-PAC1-550W is replaced with UCS-PSU-6248UP-AC  and not UCS-PSU-6296UP-AC.

That is the official replacement Part ID, it should not have any problems

 

-Kenny

View solution in original post

3 REPLIES 3
Keny Perez
Collaborator

According to: http://www.cisco.com/c/en/us/products/collateral/servers-unified-computing/ucs-6100-series-fabric-interconnects/eol_c51-709473.html ; : N10-PAC1-550W is replaced with UCS-PSU-6248UP-AC  and not UCS-PSU-6296UP-AC.

That is the official replacement Part ID, it should not have any problems

 

-Kenny

View solution in original post

Thank you Keny,

My mistake, I copied the wrong part number from the table.

no problem.. if it helped, rate it... if it answered your question, marked it as such.

 

Thanks

-Kenny