Server Networking

Hi everyone,Has anyone had experience upgrading the UCS X210c M6 Server Firmware (Bundle B) directly from version 4.3 to 6.0(2)?The UCS Infrastructure Firmware (Bundle A) is already running 6.0(2).I've checked Cisco's official documentation, but I co...

Hi,I’m looking to practice Cisco ACI. Is it possible to run ACI at home using EVE-NG? If not, are there any affordable online rack rental options available for Cisco ACI labs?Thanks in advance!

I would like to confirm the compatibility of the following setup: HBA: Emulex LPe35002 Dual-Port 32G Fibre Channel HBA SFP Modules: 16G FC SFP+ (Short Wave) Storage: HPE MSA2050 (16G Fibre Channel) Could you please help confirm: Whether the LPe35002 ...

From a computer, I am unable to connect to a website on a web server through the websites name. I am only able to connect to the website through its ip address. However if I use the browser on the server its self, I am able to connect through both th...

Is there a way to check if Cisco MDS (NX-OS) is affected by the following certificate expiration issues?https://support.microsoft.com/ja-jp/topic/windows-%E3%82%BB%E3%82%AD%E3%83%A5%E3%82%A2-%E3%83%96%E3%83%BC%E3%83%88%E8%A8%BC%E6%98%8E%E6%9B%B8%E3%8...

My embedded network card 10G not working on Cisco UCS Server . I have enabled MLOM on BIOS and tried updating Intel Dual 10G x550 Drivers , still my normal ethernet data ports not working.Please help me with this issue.

I have a UCS-C240-M7 device, Please guide me to upgrade Unified Computing System (UCS) Server Firmware ucs-c240m7-huu-4.3.6.250053.iso

i have a project to design a data center purely web hosting. i need advice on what factors i should consider and which cisco platforms best fits for scalability, performance for web servicesmy thinking1. for FW should I use pix or asa?which is better...

configure HTTP server and demonstrate the process to access a website using IP address in real time and simulation mode

Hello, such a question for you: I am doing the work 2.5.2.7 Packet Tracer, according to the task, you need to follow the link http://www.cisco.corp to download files, but it says to me that Host Name Unresolved, no matter how I try to do it , still d...

Hi, I have 4 policy servers between two Nexus 5600 switches. Server are fully L2 transparent and each server has two interfaces. From perspective of Nexuses each server act as a wire so from L2 perspective Nexuses are directly connected. Port E1/1 on...

Dear Team,We have installed VMware ESXi 7.0 U3 (Build 24723872) on our Dell device. As per Broadcom’s recommendations, it is advisable to upgrade to a later build version to address critical security and stability concerns.The recommended build detai...

Hello everyone! I have a vxlan/evpn multisite fabric, two data centers 65502 - DC-2, 65503 - DC-3 and two vrfs: vrf_2 and vrf_3. I'm trying to route leaking between them  DC-2-BGW-1-1/1-2 (anycast bgw) and everything is correct on the routes in two v...