Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
On the 7811 the web interface is disabled by default and won’t appear unless it’s explicitly enabled from CUCM (Enterprise Parameters → Web Access = Enabled) and allowed in the phone config. Simply loading SIP firmware isn’t enough. Also make sure yo...
This log is harmless — it just means the QFP punt policer is dropping subnet broadcast traffic from VLAN 8 (usually noisy devices or broadcast-heavy apps). No impact is expected unless you’re seeing performance issues. To quiet it, either reduce broa...
Webex Calling MPP phones are currently limited to 16 line keys for speed dials — that’s a platform/UI limit and can’t be expanded like CUCM. The practical workaround is to move the rest into the user’s Webex App contacts or use the phone’s local dire...
Yes, this is a classic ISE 1.4 disk-full issue — when / hits 100%, most services won’t start.What to do safely:1. Check large filesshow diskshow tech-support | i include /opt|/var 2. Clean old logs and cores (safe in 1.4):application configure ise re...
