04-18-2023 07:32 PM - edited 04-18-2023 07:46 PM
Hello,
I want to setup LACP bonding with proper/optimal configuration between UCS 480M5 with VIC 1455 (4x 25Gb links) and N9K. The UCS server runs Oracle DBs on RHEL8
2x N9K switches have been vPC LACP (active) mode. From server side 2 links, VIC ports 1&2 go to switch 1 and 3&4 go to second switch. PortChannel on the VIC is disabled. I created 4x vNICs corresponding to respective uplink ports. Setup Linux bonding using 4x VNICs. The bond is working.
Now I'm not sure if there is an optimal setup and if I need update any config/parameter ( LACP rate, ad_select, layer3+4 etc.) to ensure both switches and the servers LACP config is optimal.
Please advise.
Thanks
Solved! Go to Solution.
05-03-2023 09:39 AM - edited 05-03-2023 09:41 AM
This screen cap lists supported configurations for VIC 1455/1457 for LACP without "Port-channel" checkbox:
pg 28-29
05-03-2023 09:14 AM
Hmm. no one out there have setup/configured this?
05-03-2023 09:39 AM - edited 05-03-2023 09:41 AM
This screen cap lists supported configurations for VIC 1455/1457 for LACP without "Port-channel" checkbox:
pg 28-29
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide