cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
Announcements

CISCO SWITCHES FOR SMALL and MEDIUM BUSINESS

Introducing the next generation of Cisco Small and Medium Business Switches. Cisco is refreshing its SMB Switch portfolio. Click here  to learn more.


9923
Views
0
Helpful
2
Replies
Highlighted
Cisco Employee

Unable to get to the web interface for SG200-18

Hi,

I got a new switch and am trying to connect a UCS server to it.  I can ping the switch just fine but when I try to use IE8 or firefox, I can't get to the web interface to configure it.

Here's my setup:

Cisco UCS C210 M2

IP = 192.168.1.100

Subnet = 255.555.255.0

Default Gateway = 192.168.1.1

SG200-18 Switch

Default IP = 192.168.1.254  (it's not DHCP)

Pointers anyone??

Tom G

1 ACCEPTED SOLUTION

Accepted Solutions
Participant

Unable to get to the web interface for SG200-18

You will have to set a static IP address on the PC that is connected to the switch. The IP address of the PC

has to be on the same subnet as the 192.168.1.254.  You might have to try something lower than IE8. It should

work with Firefox and IE7. There is also a browser called GreenBrowser that usually works well with out switches.

THANKS

Rick Roe

Cisco Small Business Support Center

2 REPLIES 2
Participant

Unable to get to the web interface for SG200-18

You will have to set a static IP address on the PC that is connected to the switch. The IP address of the PC

has to be on the same subnet as the 192.168.1.254.  You might have to try something lower than IE8. It should

work with Firefox and IE7. There is also a browser called GreenBrowser that usually works well with out switches.

THANKS

Rick Roe

Cisco Small Business Support Center

Cisco Employee

Unable to get to the web interface for SG200-18

Thanks Rick!  I got it to work with Firefox.  I forgot to set proxy settings initially but all is good now.