Storage Networking

i realize this may not be the right forum for this, but i'm afraid, HDS's forum has left me high and dry.I'm running Storage Manager v7.11. I'm running into an issue that I cannot seem to locate any info on...When connected directly to the array (AM...

I have been tasked with upgrading the switch from sup1 to sup2 on a 9500 switch. Can anyone direct me to a comprehensive document for this particular task. Also are there any Gotchas that I should be aware off.Thanks

if i had a c class blade server and wanted to implement a (small) emc FC SAN and use blade switches - whats the minimum i need?C-class server chassis/bladesA nexus 5010 with some FC portsmds9124the licence for the nexusfabric managerhave i missed any...

Greetings,When I am looking at the Fabric in Fabric Manager, the switches present information like name, etc.. and tere is a Status entry. I see Status of No Traps. What does it mean? Stephen

what's the key difference between B2B credit and write acceleration?-Thanks in adv

Hi all, I just would like to ask help from anyone here in the forum. Here's the log or find attached. `show module internal exceptionlog`********* Exception info for module 1 ******** exception information --- exception instance 1 ----Module Slot Num...

hey folks,I have experience with EMC storage arrays and McData/Brocade directors and switches...but, i'm lacking any knowledge of the MDS9000 series fiber directors and more specifically, the HDS storage arrays...What software is used to manage the H...

Hello,I'm wondering if there are ways to automate the backup of the zones and zoneset that you can perform with the fabric manager GUI?maybe through the CLI?many thanksEric

hi folks, new to the MDS9500 series directors...so i'm going to ask some basic questions.Currently have 2 switches. I've inherited this issue, they are attached to HDS arrays. one switch shows the HDS FA's, but the other does not.I'm assuming, it h...

Can some one contrast the differences between intra VSAN and inter VSAN zone merge?-Thanks in adv

hellocustomer trying to close zone under FMand received following error messageany advice welcomed i didnt find any reference in documentationJYPSNMP: Zone: Duplicate member - RWSE-02A ZoneAliasList .1401.7

Guys:Config info:I have a HP C class blade enclosure, with 2 new 9124e's in it. I need to activate it,and figure on doing the following:Define 2 T ports on the 9124e, and connect them, to 2 Fx ports on the 9509.(1 9124 to each 9509 for redundancy)He...