Storage Networking

Hi. I have 2 switches MDS 9513 and 9506, 2 Storages HITACHI VSP and 9 Servers VMWARE. All servers have 2 HBAs, 1 connect each switch. One storage have 2 HBAs connect each switch, the other 1 HBA connect each switch. Each Server's HBA have individual ...

Hi, I'm trying to check if I the admin password/account that I have is a admin account or not. The thing is that We need change the management ip's and we think that we don't have the right admin password so in case that we had problems we need to be...

We have several hosts which has already been decommissioned and associated zonings are no longer needed as well. However, these information are still in the configuration. They said there should be no impact to leave them there. My question is, is th...

We have performance issues to access FC LUNs in a 2-MDS switches environment. On the storage (NetApp), we don't find any latency, or any obvious issues. My questions, on the switch side, what steps can I do to troubleshoot any performance issues, any...

how to add new WWN to existing fcalias/Zone/zoneset by using Cisco CLI

https://bst.cloudapps.cisco.com/bugsearch/bug/CSCVA23262 Thanks.

Hi , While we try to upgrade the IOS in nexus 3k. we get the error"Permission Denied" we did the basic troubleshooting everything is fine. I can able to ping my switch from TFTP pc. Kindly suggest what is the issue?

I have re-purposed an existing switch and for the most part all look goods except when I create a new VSAN I am unable to create a new zoneset and activate. the default VSAN1 exist and has been deactivated. I receive an error stating zone not present...

We have a Cisco MDS 9513 SAN multilayer director. The switch does not have any ISLs. It uses basic not enhanced zoning.  I noticed that the number of zones in the full zone database is less than the zones in the active zoning database.  When I do a "...