08-15-2016 10:31 PM
hi, everyone:
could you please help me ? for how to solve the port initializing ?
the port is connect to UCS FI 6324.
mds9124# show interface fc1/6
fc1/6 is down (Initializing)
Hardware is Fibre Channel, SFP is short wave laser w/o OFC (SN)
Port WWN is 20:06:00:2a:6a:89:ec:02
Admin port mode is auto, trunk mode is on
snmp link state traps are enabled
Port vsan is 102
Receive data field Size is 2112
Beacon is turned off
5 minutes input rate 648 bits/sec, 81 bytes/sec, 0 frames/sec
5 minutes output rate 184 bits/sec, 23 bytes/sec, 0 frames/sec
4155 frames input, 613784 bytes
0 discards, 0 errors
0 CRC, 0 unknown class
0 too long, 0 too short
3198 frames output, 157848 bytes
0 discards, 0 errors
288 input OLS, 7 LRR, 4 NOS, 0 loop inits
487 output OLS, 435 LRR, 185 NOS, 336 loop inits
Interface last changed at Thu Aug 11 22:12:39 2016
.
Solved! Go to Solution.
08-16-2016 11:56 PM
Maybe you hit
https://bst.cloudapps.cisco.com/bugsearch/bug/CSCuz11494/?referring_site=bugquickviewredir
08-17-2016 12:08 AM
Cisco MDS Blade Switches, MDS 9124 and 9134 Multilayer Fabric Switches - System Image for 5.0(1a). m9100-s2ek9-mz.5.0.1a.bin |
22-FEB-2010 | 53.62 MB |
is very old ! please update your MDS 9124, eg.
Cisco MDS Blade Switches, MDS 9124 and 9134 Multilayer Fabric Switches - System Image for 5.2(8h). m9100-s2ek9-mz.5.2.8h.bin |
02-MAY-2016 | 50.94 MB |
of course you need system and kickstart file, see eg.
http://www.cisco.com/c/en/us/support/docs/storage-networking/mds-9000-nx-os-san-os-software/118952-technote-mds9k-00.html
08-16-2016 12:44 AM
Is the port on the UCS FI native FC ?
is the port on the UCS FI in VSAN 102
is the UCS FI in FC End host mode
Has the FC port on the UCS FI a FC SFP ?
Is the MDS configured with NPIV ?
PS.
Is this the same problem as
https://supportforums.cisco.com/discussion/13094931/fi-6324-fc-port-overall-status-admin-down
08-16-2016 01:10 AM
Is the port on the UCS FI native FC ?
YES
is the port on the UCS FI in VSAN 102
YES
is the UCS FI in FC End host mode
YES
Has the FC port on the UCS FI a FC SFP ?
YES
Is the MDS configured with NPIV ?
YES
same problem
08-16-2016 11:30 AM
any information in the MDS log file ?
show logging log ?
Try also to shut / no shut this port !
08-16-2016 06:50 PM
2016 Aug 16 17:47:50 ntcloud-mds9124 %PORT-5-IF_DOWN_NONE: %$VSAN 102%$ Interface fc1/5 is down (None)
2016 Aug 16 17:47:50 ntcloud-mds9124 %PORT-5-IF_DOWN_OLS_RCVD: %$VSAN 102%$ Interface fc1/5 is down (OLS received)
2016 Aug 16 17:47:59 ntcloud-mds9124 %PORT-5-IF_DOWN_OLS_RCVD: %$VSAN 102%$ Interface fc1/5 is down (OLS received)
2016 Aug 16 17:47:59 ntcloud-mds9124 %PORT-5-IF_PORT_QUIESCE_FAILED: Interface fc1/6 port quiesce failed due to failure reason: Force Abort Due to Link Failure (NOS/LOS
) (0x119)
2016 Aug 16 17:47:59 ntcloud-mds9124 %PORT-5-IF_DOWN_NONE: %$VSAN 102%$ Interface fc1/6 is down (None)
2016 Aug 16 17:47:59 ntcloud-mds9124 %PORT-5-IF_DOWN_OLS_RCVD: %$VSAN 102%$ Interface fc1/6 is down (OLS received)
2016 Aug 16 17:48:30 ntcloud-mds9124 %PORT-5-IF_DOWN_OLS_RCVD: %$VSAN 102%$ Interface fc1/6 is down (OLS received)
2016 Aug 16 17:48:30 ntcloud-mds9124 %PORT-5-IF_PORT_QUIESCE_FAILED: Interface fc1/5 port quiesce failed due to failure reason: Force Abort Due to Link Failure (NOS/LOS
) (0x119)
2016 Aug 16 17:48:30 ntcloud-mds9124 %PORT-5-IF_DOWN_NONE: %$VSAN 102%$ Interface fc1/5 is down (None)
2016 Aug 16 17:48:30 ntcloud-mds9124 %PORT-5-IF_DOWN_OLS_RCVD: %$VSAN 102%$ Interface fc1/5 is down (OLS received)
2016 Aug 16 17:48:34 ntcloud-mds9124 %PORT-5-IF_DOWN_OLS_RCVD: %$VSAN 102%$ Interface fc1/5 is down (OLS received)
2016 Aug 16 17:48:34 ntcloud-mds9124 %PORT-5-IF_DOWN_OFFLINE: %$VSAN 102%$ Interface fc1/5 is down (Offline)
2016 Aug 16 17:48:34 ntcloud-mds9124 %PORT-2-IF_DOWN_LINK_FAILURE: %$VSAN 102%$ Interface fc1/5 is down (Link failure)
2016 Aug 16 17:48:39 ntcloud-mds9124 %PORT-2-IF_DOWN_LINK_FAILURE: %$VSAN 102%$ Interface fc1/5 is down (Link failure)
2016 Aug 16 17:48:39 ntcloud-mds9124 %PORT-5-IF_PORT_QUIESCE_FAILED: Interface fc1/6 port quiesce failed due to failure reason: Force Abort Due to Link Failure (NOS/LOS
) (0x119)
2016 Aug 16 17:48:39 ntcloud-mds9124 %PORT-5-IF_DOWN_NONE: %$VSAN 102%$ Interface fc1/6 is down (None)
2016 Aug 16 17:48:39 ntcloud-mds9124 %PORT-5-IF_DOWN_OLS_RCVD: %$VSAN 102%$ Interface fc1/6 is down (OLS received)
2016 Aug 16 17:48:43 ntcloud-mds9124 %PORT-5-IF_DOWN_OLS_RCVD: %$VSAN 102%$ Interface fc1/6 is down (OLS received)
2016 Aug 16 17:48:43 ntcloud-mds9124 %PORT-5-IF_DOWN_OFFLINE: %$VSAN 102%$ Interface fc1/6 is down (Offline)
2016 Aug 16 17:48:43 ntcloud-mds9124 %PORT-2-IF_DOWN_LINK_FAILURE: %$VSAN 102%$ Interface fc1/6 is down (Link failure)
2016 Aug 16 17:49:14 ntcloud-mds9124 %PORT-2-IF_DOWN_LINK_FAILURE: %$VSAN 102%$ Interface fc1/6 is down (Link failure)
2016 Aug 16 17:49:14 ntcloud-mds9124 %PORT-5-IF_PORT_QUIESCE_FAILED: Interface fc1/5 port quiesce failed due to failure reason: Force Abort Due to Link Failure (NOS/LOS
) (0x119)
2016 Aug 16 17:49:14 ntcloud-mds9124 %PORT-5-IF_DOWN_NONE: %$VSAN 102%$ Interface fc1/5 is down (None)
2016 Aug 16 17:49:14 ntcloud-mds9124 %PORT-5-IF_DOWN_OLS_RCVD: %$VSAN 102%$ Interface fc1/5 is down (OLS received)
2016 Aug 16 17:49:23 ntcloud-mds9124 %PORT-5-IF_DOWN_OLS_RCVD: %$VSAN 102%$ Interface fc1/5 is down (OLS received)
2016 Aug 16 17:49:23 ntcloud-mds9124 %PORT-5-IF_PORT_QUIESCE_FAILED: Interface fc1/6 port quiesce failed due to failure reason: Force Abort Due to Link Failure (NOS/LOS
) (0x119)
2016 Aug 16 17:49:23 ntcloud-mds9124 %PORT-5-IF_DOWN_NONE: %$VSAN 102%$ Interface fc1/6 is down (None)
2016 Aug 16 17:49:23 ntcloud-mds9124 %PORT-5-IF_DOWN_OLS_RCVD: %$VSAN 102%$ Interface fc1/6 is down (OLS received)
2016 Aug 16 17:49:26 ntcloud-mds9124 %PORT-5-IF_DOWN_OLS_RCVD: %$VSAN 102%$ Interface fc1/6 is down (OLS received)
2016 Aug 16 17:49:26 ntcloud-mds9124 %PORT-5-IF_DOWN_OFFLINE: %$VSAN 102%$ Interface fc1/6 is down (Offline)
2016 Aug 16 17:49:27 ntcloud-mds9124 %PORT-2-IF_DOWN_LINK_FAILURE: %$VSAN 102%$ Interface fc1/6 is down (Link failure)
08-16-2016 07:12 PM
hi, Walter Dey:
has ever try to shutdown and no shutdown port, but the result is same .
i do not understand,what cause can put a port into initializing ?
and how to found out the cause ?
has ever try to debug port , but cannot understand it .
08-16-2016 11:56 PM
Maybe you hit
https://bst.cloudapps.cisco.com/bugsearch/bug/CSCuz11494/?referring_site=bugquickviewredir
08-16-2016 11:57 PM
08-17-2016 12:08 AM
Cisco MDS Blade Switches, MDS 9124 and 9134 Multilayer Fabric Switches - System Image for 5.0(1a). m9100-s2ek9-mz.5.0.1a.bin |
22-FEB-2010 | 53.62 MB |
is very old ! please update your MDS 9124, eg.
Cisco MDS Blade Switches, MDS 9124 and 9134 Multilayer Fabric Switches - System Image for 5.2(8h). m9100-s2ek9-mz.5.2.8h.bin |
02-MAY-2016 | 50.94 MB |
of course you need system and kickstart file, see eg.
http://www.cisco.com/c/en/us/support/docs/storage-networking/mds-9000-nx-os-san-os-software/118952-technote-mds9k-00.html
08-17-2016 12:08 AM
hi, Walter Dey : thank you very much, i will update right now. any news will be revert back you. xiazhen
12-31-2018 10:40 AM
I seem to be running into this issue on a brand new UCS 6332 with Nexus 5672 (7.1(0)N1(1a)).
This new UCS has a OUI of 00:3a:9c
Do you know which Nexus version supports this new OUI?
I am able to bring up the ports , but not as part of a SAN PC.
12-31-2018 10:47 AM
There is a bug from November - https://bst.cloudapps.cisco.com/bugsearch/bug/CSCvn39155
However it doesn't have a fixed release.
08-16-2016 11:45 PM
Hi,
Sometimes we have the same problem and almost every time the problem is not in "our side" (switch/port) almost always the problem is a problem with port of the hba or fiber cabling. If checking the hba's in the other side and fiber cabling doesn't work I would check the gbic's/sfp in switch side.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide