hi, everyone: could you please help me ? for how to solve the port initializing ? the port is connect to UCS FI 6324. mds9124# show interface fc1/6fc1/6 is down (Initializing) Hardware is Fibre Channel, SFP is short wave laser w/o OFC (SN) P...
Hi, I have a requirement to perform a zone-merge on two MDS switches. Both have the same zoneset name in vsan200 - Zoneset1. In Switch1 Zoneset1 has 10 zones and in switch2 Zoneset1 has 12 zones. The merge-control setting is set to "restrict". I am ...
Hi All We have 2 standalone Cisco 9148 switches.I plan to add new zones to an already activated zoneset in anticipation of new hosts. I am planning not to activate the zoneset after adding the new zones until the new hosts are installed which would l...
Hi My name is sreejesh for one of my project we brought DS-C9148S-12PK9 and trying to configure its simply shown loader > there is no IOS
Hi, we can admin the switch via CLI but we can not access the switch via a web browser. The http services are running. Is this a license issue(I thought no special license was needed for web admin)? Any help would be appreciated.
I am currently are running the DCNM client 7.2. for my MDS 9710 switches. I would like to start using the web client. When I try and access the web client I receive an IIS 7 web-page. Do you have any recommendations/documentation on where to start. ...
We would like to Add Cisco MDS and Brocade Switch in the same fabric.Please update how we could be able to do so
Hello,We are migrating host (UCS) uplinks (NVIP) from one MDS to another MDS (one fabric at a time).The interfaces (4) are in a port channel.So we created a new port channel on the new MDS and an additional port channel on the Fabric Interconnect.Pla...
Hi everyone, DCNM 11.0.1 doesn't support SAN in the OVA version. 1) We'd like to see if it's possible to have SAN support while upgrading from DCNM 10.4.2 OVA to 11.0.1 OVA, as a workaround to DCNM 11.0.1 OVA not having SAN support. Can anyone pr...
Hell All, We have a very unique problem with our storage team and I am looking for a possible answer/confirmation We have connected the DELL-EMC Unity 450F to our Cisco Nexus switches via direct attach cable. So we can make use of all 10Gbps avai...
Hi All; I have port issue on my Cisco MDS 9148 FC. It has no light on that port. fc1/12 is down (Link failure or not-connected) Hardware is Fibre Channel, SFP is short wave laser w/o OFC (SN) Port WWN is 20:0c:00:2a:6a:8b:ce:00 Admin port mode...
Hello. Any and all help appreciated. Please see the attached diagram. 7ks are at the core. 2ks are at the distribution/agg layer(layer 2 only) The port-channel comes up and all appears well. However Netapp cannot ping(communicate) with Core-A's I...
Hi, I have a problem about zone merge in the MDS9148S. In my case, I have two MDS and they set as ISL on the two MDS device. As you know on the default status, activate zoneset only can share between two ISL device. I'd like to merge and share all ...
Current environment is two separate fabrics made up of 9513's running 5.2.8a. attached through ISL's are IBM Blade centers using Cisco 4GB switch modules running various versions of 5.2.8. Also IBM Blade centers using Brocade 8GB switch modules in na...
Hello I have a customer which need to deploy a backup server on remotely (approx. 1km away) from their FC fabric... This means multimode will not suffice, thus need for singlemode... is it possible to buy a LW SFP+ for both SAN switch (Brocade) a...
