Hello,
Im trying to setup an EtherChannel between my 3750 stack and my 2960S stack.
I have 2 3750x in stack form. (2 switches).
I have 4 2960s in stack form. (4 switches).
I need to create a 2GB channel between them. My core is the 3750, and my 4 stack 2960s is on another floor, so I want to create a 2GB pipe between them.
I know you can create a PO between them, but what I want to do is create a 2GB pipe between them that run at the same time, active on both 1GB ports.
Is that possible and how? This is my current setup so far:
Switch Stack 3750
interface Port-channel10
description ETHSW04-1.5
switchport trunk encapsulation dot1q
switchport trunk allowed vlan 1,210,220,214,216,220,306,406
switchport mode trunk
snmp trap mac-notification change added
snmp trap mac-notification change removed
spanning-tree guard loop
spanning-tree cost 15
interface Port-channel11
description BRP-Uplink to ETHSW04-1.5
switchport trunk encapsulation dot1q
switchport trunk allowed vlan 1,210,220,214,216,220,306,406
switchport mode trunk
snmp trap mac-notification change added
snmp trap mac-notification change removed
spanning-tree guard loop
spanning-tree cost 1
interface GigabitEthernet1/0/39
description Uplink to ETHSW04-1.5
switchport trunk encapsulation dot1q
switchport trunk allowed vlan 1,210,220,214,216,220,306,406
switchport mode trunk
snmp trap mac-notification change added
snmp trap mac-notification change removed
spanning-tree guard loop
channel-protocol lacp
channel-group 10 mode active
interface GigabitEthernet1/0/40
description Uplink to ETHSW04-1.5
switchport trunk encapsulation dot1q
switchport trunk allowed vlan 1,210,220,214,216,220,306,406
switchport mode trunk
snmp trap mac-notification change added
snmp trap mac-notification change removed
spanning-tree guard loop
channel-protocol lacp
channel-group 10 mode active
interface GigabitEthernet2/0/39
description Uplink to BRP-Uplink to ETHSW04-1.5
switchport trunk encapsulation dot1q
switchport trunk allowed vlan 1,210,220,214,216,220,306,406
switchport mode trunk
snmp trap mac-notification change added
snmp trap mac-notification change removed
spanning-tree guard loop
channel-protocol lacp
channel-group 11 mode active
interface GigabitEthernet2/0/40
description Uplink to BRP-Uplink to ETHSW04-1.5
switchport trunk encapsulation dot1q
switchport trunk allowed vlan 1,210,220,214,216,220,306,406
switchport mode trunk
snmp trap mac-notification change added
snmp trap mac-notification change removed
spanning-tree guard loop
channel-protocol lacp
channel-group 11 mode active
---------------------------------------------------------------------------------
Switch stack 2960s
interface Port-channel1
description Uplink to CORE01
switchport trunk allowed vlan 1,210,220,214,216,220,306,406
switchport mode trunk
snmp trap mac-notification change added
snmp trap mac-notification change removed
spanning-tree guard loop
spanning-tree cost 15
interface Port-channel2
description BRP-Uplink to CORE02
switchport trunk allowed vlan 1,210,220,214,216,220,306,406
switchport mode trunk
snmp trap mac-notification change added
snmp trap mac-notification change removed
spanning-tree guard loop
spanning-tree cost 1
interface GigabitEthernet1/0/47
description CORE1-G1/0/39
switchport trunk allowed vlan 1,210,220,214,216,220,306,406
switchport mode trunk
snmp trap mac-notification change added
snmp trap mac-notification change removed
spanning-tree guard loop
channel-protocol lacp
channel-group 1 mode active
interface GigabitEthernet1/0/48
description CORE1-G1/0/40
switchport trunk allowed vlan 1,210,220,214,216,220,306,406
switchport mode trunk
snmp trap mac-notification change added
snmp trap mac-notification change removed
spanning-tree guard loop
channel-protocol lacp
channel-group 1 mode active
interface GigabitEthernet4/0/47
description BRP-CORE2-G2/0/39
switchport trunk allowed vlan 1,210,220,214,216,220,306,406
switchport mode trunk
snmp trap mac-notification change added
snmp trap mac-notification change removed
spanning-tree portfast
spanning-tree guard loop
channel-protocol lacp
channel-group 2 mode active
!
interface GigabitEthernet4/0/48
description BRP-CORE2-G2/0/40
switchport trunk allowed vlan 1,210,220,214,216,220,306,406
switchport mode trunk
snmp trap mac-notification change added
snmp trap mac-notification change removed
spanning-tree portfast
spanning-tree guard loop
channel-protocol lacp
channel-group 2 mode active
Thanks...
