can you setup LACP across a stack with SG500

[EnlightenDesigns]

Hi guys,

I am looking at buying 2x SG500-48 switches with the stacking cables and connecting them into a ring stack topology.

my reason for wanting this is so we can setup LACP connections from our hyper-v servers to the 2 stacked switches so the we have a redundant connection to the network if one of the switches is to fail. can you setup LACP links on the stacked SG-500 switches to be in the same group/link?

[Tom Watts · Accepted solution]

Sure can

-Tom
Please mark answered for helpful posts
http://blogs.cisco.com/smallbusiness/

[mpyhala · Accepted solution]

Damon,

I think that you will find the following thread helpful:

https://supportforums.cisco.com/message/3832040

- Marty

[Nagaraja Thanthry · Accepted solution]

Hello Damon,

The following link shows the step-by-step instructions to configure LACP ling aggregation on Sx500 switches.

http://sbkb.cisco.com/CiscoSB/ukp.aspx?vw=1&docid=6876d888fbce42e1a21be246f2e0cbf7_Link_Aggregation_Control_Protocol__LACP__Configuration_on_Sx.xml&pid=2&respid=0&snid=11&dispid=0&cpage=search

Hope this helps.

Nagaraja