CBS250-8T-D TACACS missing

[Clem58]

Hello,

We have configured a new CBS250-8T-D Cisco Business 250 series, but we cannot see any TACACS settings for this device, only Radius, while on the specs and the help it's mentioned we can configure TACACS.

Do you have any info on this ?

Many thanks by advance.

[M02@rt37 · Accepted solution]

Hello @Clem58,

CBS250 series do not support TACACS. 

https://www.cisco.com/c/en/us/products/collateral/switches/business-250-series-smart-switches/nb-06-bus250-smart-switch-ds-cte-en.html

CBS350 yes!

[Clem58]

Ok many thanks for your help