Hey Guys
For a Lab device I've got a cbs350-24p-4x. With it's 4 TenGigabitEthernet ports I'd like to use port TE1/0/1-2 for lacp to my firewall and with TE1/0/3-4 ports I'd like to connect to my vsphere ESXI host.
The Switch is running on the latest FW Version: 3.4.0.17. My config is fairly simple, nothing crazy, a couple of vlans, some access and some trunk ports and my two port-channel groups.
Now my issue is the following: I'd like to use all my 4 TE ports, TE1/0/1-2 work fine, I can see my sfp/sfp+/dac modules with show inventory, but as soon as I plug anything into TE1/0/3-4 nothing. TE1/0/1-4 have the same config.
As soon as I plug in the DAC Cable (SFP-H10GB-CU1M ) to TE1/0/1 and TE1/0/4 The Port TE1/0/1 changes it's status to up.
Another thing is if I enter the command show interface my TE1/0/3-4 do not show up, only TE1/0/1-2, but I can See the status if I enter the command "show interfaces status TenGigabitEthernet1/0/4".
Has anybody an Idea how I could resolve this issue?
"
