CBS350-48P hangs at "Loading system/images/active-image" on boot.

makho5383 · ‎01-18-2025

Hi,Guys

I have a CBS350-48P that will not boot properly. It gets to Loading system/images/active-image and hangs.

I have tried to XMODEM the firmware to it, but the transfer long times after compelet transfer !!! Failed to read FPGA (0x11) Board id reg (0x01)!!!

U-Boot 2013.01 (Aug 14 2020 - 19:28:28) Marvell version: armada-17.06.6 3.0.0.24

AND

fan highspeed working

Kasun Bandara · ‎01-18-2025

@makho5383 hi, seems like you are facing boot level issue. better contact cisco TAC for this through https://www.cisco.com/c/en_sg/support/index.html

Please rate this and mark as solution/answer, if this resolved your issue
Good luck
KB

marce1000 · ‎01-19-2025

- This could be a hardware issue ; try a factory reset,

M.

-- Each morning when I wake up and look into the mirror I always say ' Why am I so brilliant ? '
When the mirror will then always repond to me with ' The only thing that exceeds your brilliance is your beauty! '

makho5383 · ‎01-19-2025

device no currectly for reset

marce1000 · ‎01-20-2025

- There are no other alternatives in this case ,

M.

-- Each morning when I wake up and look into the mirror I always say ' Why am I so brilliant ? '
When the mirror will then always repond to me with ' The only thing that exceeds your brilliance is your beauty! '