04-20-2022 01:43 PM
Hello,
I am new here and need help creating a default route. I have a SG350 configured as follows:
I created 6 vlan and assigned them to ports (access/trunk etcIPv4 static routes).
Then under IPv4 Interface I set IPv4 routing to enable and assigned IP addresses to the vlan.
VLAN 17 172.16.1.3/24
VLAN 11 192.168.11.254/24
VLAN 12 192.168.12.254/24
....
VLAN 16 192.168.16.254/24
IPv4 static routes I created a default route:
0.0.0.0/0 net hop 172.16.1.2 metric 4
But no outgoing interface is created. But it should be VLAN 17. What am I doing wrong here?
Solved! Go to Solution.
04-23-2022 03:12 AM
I have solved it. The problem sat in front of the screen. I have configured the port incorrectly. The port was configured to access and not to trunk as it should be. Now everything works.
04-20-2022 03:38 PM
But no outgoing interface is created. But it should be VLAN 17. What am I doing wrong here?
not able to understand this, what outgoing interface?
Have you connected another switch?
Switch to Switch connected and connection established with other switches you see that interface I guess.
04-20-2022 06:09 PM
Why are using metric 4. If theres another route with metric 0, it will be prefered
04-23-2022 03:12 AM
I have solved it. The problem sat in front of the screen. I have configured the port incorrectly. The port was configured to access and not to trunk as it should be. Now everything works.
04-23-2022 05:16 AM
Glad you were able to resolve and thank you for the feedback.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide