01-27-2021 09:15 AM
Hello,
I want to disable DHCP on the switch because I have 3rd party DHCP Server..
how can I do that via CLI ?
Solved! Go to Solution.
01-27-2021 12:30 PM
Assign IP for what?
you want to get DHCP IP address for clients from 3rd Party DHCP Server follow below guide :
01-27-2021 09:19 AM - edited 01-27-2021 09:20 AM
May be you can try below :
config t
!
no ip dhcp server
no ip dhcp relay enable
!
end
Still issue please post show run
01-27-2021 09:23 AM
I don't need to assign the IP of the 3rd party DHCP server ?
01-27-2021 09:28 AM
then this help you - you need dhcp relay, if you have other DHCP Server in the network who help to assign the IP address.
confiure ip helper address in the SVI interface to reach the DHCP Server of 3rd party.
config t
!
no ip dhcp server
!
end
01-27-2021 09:47 AM
sorry but how can I assign the ip ?
01-27-2021 12:30 PM
Assign IP for what?
you want to get DHCP IP address for clients from 3rd Party DHCP Server follow below guide :
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide