02-22-2023 06:29 PM - edited 02-22-2023 06:33 PM
hi everyone,
I installed cisco catalysh under the router as L2 to manage the vlan that was released from the router, but one day from the router it monitored very high ICMP packets coming from the ip switch like "ICMP flooding attack",
I checked the logs and settings there was nothing suspicious,
I've read this is caused by "icmp redirect" from the switch and it only needs to be disabled, but on the Cisco CBS350 there is no command "no ip redirect" is there an alternative that I can do?
Best regards,
Huda
02-22-2023 11:01 PM
as per the command syntax its available : (unfortunately not much information is provided by the document)
02-23-2023 11:30 PM
Hello balaji
Thanks for the suggestion, from that page it turns out that the command "no ip redirect" must be applied to the ip switch interface not in vlan, but it turns out that even though I have disabled the ip redirect, sometimes the icmp flood still occurs.
Kind regards,
huda
02-24-2023 06:40 PM
These small business switches as per I know limited capable (there may be some config required - check admin guide) unlike enterprises you can limit on control plan policy.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide