Hello,
I'm trying to setting up a LAG of 2 x 1GB between a Windows 2012 server on VMware 5.5 and a SG300-52 switch, but without any success till now.
The SG300 is configured as follow :
config-file-header
SG300-52
v1.4.0.88 / R800_NIK_1_4_194_194
CLI v1.0
set system mode router
file SSD indicator encrypted
@
ssd-control-start
ssd config
ssd file passphrase control unrestricted
no ssd file integrity control
ssd-control-end cb0a3fdb1f3a1af4e4430033719968c0
!
port jumbo-frame
vlan database
vlan 10,20,30,40,50,60,70,99
exit
voice vlan id 40
voice vlan oui-table add 0001e3 Siemens_AG_phone________
voice vlan oui-table add 00036b Cisco_phone_____________
voice vlan oui-table add 00096e Avaya___________________
voice vlan oui-table add 000fe2 H3C_Aolynk______________
voice vlan oui-table add 0060b9 Philips_and_NEC_AG_phone
voice vlan oui-table add 00d01e Pingtel_phone___________
voice vlan oui-table add 00e075 Polycom/Veritel_phone___
voice vlan oui-table add 00e0bb 3Com_phone______________
port-channel load-balance src-dst-mac-ip
ip dhcp pool network DHCP-VLAN1
address low 192.168.2.120 high 192.168.2.139 255.255.255.0
default-router 192.168.2.1
exit
ip dhcp pool network DHCP-Internal
address low 172.16.0.40 high 172.16.0.79 255.255.255.0
default-router 172.16.0.1
exit
ip dhcp pool network DHCP-Management
address low 10.0.0.120 high 10.0.0.139 255.255.255.0
default-router 10.0.0.1
exit
ip dhcp pool network DHCP-Phone
address low 10.0.2.80 high 10.0.2.99 255.255.255.0
default-router 10.0.2.1
exit
ip dhcp pool network DHCP-Pro
address low 10.0.1.140 high 10.0.1.199 255.255.255.0
default-router 10.0.1.1
exit
ip dhcp relay address 10.0.0.60
ip dhcp relay enable
ip dhcp information option
bonjour interface range vlan 1,10,20,30
qos trust cos
hostname SG300-52
username cisco password encrypted c464af817287343305cbd6493c593885695df531 privilege 15
ip ssh server
ip telnet server
!
interface vlan 1
ip address 192.168.2.1 255.255.255.0
no ip address dhcp
!
interface vlan 10
name Management
ip address 10.0.0.1 255.255.255.0
ip dhcp relay enable
!
interface vlan 20
name Pro
ip address 10.0.1.1 255.255.255.0
ip dhcp relay enable
!
interface vlan 30
name Internal
ip address 172.16.0.1 255.255.255.0
ip dhcp relay enable
!
interface vlan 40
name Phone
ip address 10.0.2.1 255.255.255.0
ip dhcp relay enable
!
interface vlan 50
name TV
!
interface vlan 60
name "Exchange DB Replication"
ip address 10.0.100.1 255.255.255.0
!
interface vlan 70
name Test
!
interface vlan 99
name WAN
ip address 192.168.0.2 255.255.255.224
!
interface gigabitethernet1
switchport mode access
switchport access vlan 10
!
interface gigabitethernet2
switchport trunk allowed vlan add 10,30,40
no cdp enable
!
interface gigabitethernet3
switchport trunk allowed vlan add 20
!
interface gigabitethernet4
switchport mode access
switchport access vlan 60
!
interface gigabitethernet5
switchport mode access
switchport access vlan 10
!
interface gigabitethernet6
switchport mode access
switchport access vlan 20
!
interface gigabitethernet7
switchport mode access
switchport access vlan 20
!
interface gigabitethernet8
switchport mode access
switchport access vlan 30
!
interface gigabitethernet9
switchport trunk allowed vlan add 10
!
interface gigabitethernet25
switchport mode access
switchport access vlan 10
!
interface gigabitethernet26
channel-group 2 mode on
!
interface gigabitethernet27
channel-group 2 mode on
!
interface gigabitethernet28
switchport trunk native vlan 60
!
interface gigabitethernet29
switchport mode access
switchport access vlan 20
!
interface gigabitethernet30
switchport mode access
switchport access vlan 30
!
interface gigabitethernet32
qos cos 5
switchport mode access
switchport access vlan 10
!
interface gigabitethernet45
spanning-tree link-type point-to-point
switchport mode access
switchport access vlan 50
macro description switch
!next command is internal.
macro auto smartport dynamic_type unknown
!
interface gigabitethernet46
switchport mode access
switchport access vlan 50
!
interface gigabitethernet47
switchport mode access
switchport access vlan 50
!
interface gigabitethernet48
switchport mode access
switchport access vlan 50
!
interface gigabitethernet49
switchport mode access
switchport access vlan 99
!
interface gigabitethernet51
spanning-tree link-type point-to-point
switchport trunk allowed vlan add 10,20,30,40,50,60,70,99
macro description switch
!next command is internal.
macro auto smartport dynamic_type switch
!
interface Port-channel2
description HBAIP-VM2
switchport trunk allowed vlan add 10,20,30,40
!
exit
ip default-gateway 192.168.0.1
ip route 10.0.0.0 /24 192.168.0.1
ip route 10.0.1.0 /24 192.168.0.1
ip route 10.0.2.0 /24 192.168.0.1
ip route 172.16.0.0 /24 192.168.0.1
- GE26 & GE27 have been added in LAG2
- VLAN 1UP, 10T, 20T, 30T & 40T have joined the LAG
- In VMware, a vswitch has been created, using the 2 NIC connected to the LAG; and a Virtual Machine Port Group has been created for each VLAN member of the LAG
- In Windows 2012, the 4 Network adapters have been added (1 for each VLAN), but they cannot ping their gayeway
- However, the interfaces receives correctly thei IP addresses (and options) from the DHCP server, via the DHCP relay of the SG300
I also following the configuration described in this link (http://it-erate.com/setting-lag-vmware-esxi-5-cisco-sg300/) but without any success.
Do you have any idea ?
Thanks in advance for your help.
