11-06-2013 06:21 PM
Hai help me on this..
User requirements
1) Switch is configured with a management ip 172.16.7.x
2) Two VLAN's has tobe created 114 & 115
3) Configure the switch-ports as access ports and has to be assigned with one of the two vlans as user requirement.
4) Two ports of the switch has to be configured as trunk port.
5) Port security has to be enabled in all access ports.
Solved! Go to Solution.
11-06-2013 10:04 PM
Hi Anish-
1 - Log in to the console of the switch
config t
interface vlan 1
ip address 172.16.7.x
2-
config t
vlan database
vlan 114, 115
3-
config t
int gi01
switchport mode access
switchport access vlan 114
int gi02
switchport mode access
switchport access vlan 115
4-
config t
int gi48
switchport mode trunk
switchport trunk allowed vlan add 114, 115
5-
https://supportforums.cisco.com/docs/DOC-27753
https://supportforums.cisco.com/docs/DOC-27720
-Tom
Please mark answered for helpful posts
11-06-2013 10:04 PM
Hi Anish-
1 - Log in to the console of the switch
config t
interface vlan 1
ip address 172.16.7.x
2-
config t
vlan database
vlan 114, 115
3-
config t
int gi01
switchport mode access
switchport access vlan 114
int gi02
switchport mode access
switchport access vlan 115
4-
config t
int gi48
switchport mode trunk
switchport trunk allowed vlan add 114, 115
5-
https://supportforums.cisco.com/docs/DOC-27753
https://supportforums.cisco.com/docs/DOC-27720
-Tom
Please mark answered for helpful posts
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide