Setting the SSL certificate for the web ui

[Dirk Dittert]

How can I set the SSL certificate for the management interface of an SG300? I don't seem to find the configuration option in the web gui?

[Sivaprasam Subramani · Accepted solution]

Hello Dirk,

To import/ create/ modify ssl ceritificate please go to ' 'Security > SSL Server > SSL Server Authentication Settings'.

HTTPS is enabled by default.

Thanks and regards,

Siva

[Dirk Dittert]

Hi,

there is no option "SSL Server" under Security. HTTPS is enabled in TCP/UDP Services.

[Sivaprasam Subramani]

Hello Dirk,

Kindly provide the product family and firmware version installed. I tested in my lab with SG300-24MP (firmware v1.2.9.44). Options are there...  'Security > SSL Server'..

Thanks and regards,

Siva

[Tom Watts]

Hi Dirk, on the 1.2.7.76 firmware, please reference this screen shot. If you haven't already, ensure you're on the 1.2.7.76 firmware.

-Tom
Please mark answered for helpful posts

[Dirk Dittert]

Thanks. I'm still on 1.1.2.0 (SG300-52), that's why I am probably not seeing it.I'll try updating the firmware and report if I still have problems.