Switches - Small Business

Hi....We are using Linksys SRW248G4 in our network as Layer 2 Device. We have configured QoS policy for Voice and Video Priority over Data. On Layer 3 we are using CISCO SGE 2000, on that we have also configured QoS Policy and that is working, if we ...

I am seeing a problem with our Cisco 300 switches. We use these switches as access switches, with a stacked 3750-G at the core, two 2960-S at the distribution layer, and about 10 300 Series switches at the access layer (10 port and 28 ports, all PoE)...

Hey All,I have a WRP400 VOIP Cisco router.... it is slowly driving me demented.The  WRP400 seems to hamper my ability to access outside the network over  time.   If the router is plugged in for an amount of time, my broadband  (35mb UPC) gradually ta...

Good day all,i have a very strange situation. i hope that someone can help me.situationOne off my customers has a small network with a Sonicwall NSA220 as router/wlan controler. The have a windows 2008 R2 SBS server (small business 2011) and a Cisco ...

Here is my proposed configuration, tell me if I am missing something.I have the following hypethetical subnetting scheme2 subnets, 2 vlans.lets say for argument that subnet 1 is on network 172.16.0.0and subnet 2 is on netowkr 172.16.32.0lets say of h...

I'm getting the following error in the logs of my switch and was hoping someone could shed some light for what this means?%AUTOSMARTPORT-E-DEV_CONFLICT: Conflicting devices on port gi3.  Thanks!

Hello,I have a SG300 Switche working in layer 3 mode.I configured 3 VLANs on the switch with different ip'sVlan 1: 192.168.1.1Vlan 2: 192.168,2.1Vlan 3: 192.168.3.1Now I want to implement ACL to permit vlan2 to have full access on vlan3 but I want to...

We are upgrading out internal office network. I have setup 4 switches and 1 router using the following config.2 SGE2010p's are stacked together forming vlan 30 (to be used for phones)2 SGE2010's stacked for workstation's under vlan 20Both switches ar...

Hello for all.I have an issue with SRW2024P-K9-BR (SG300). Datasheet and configuration guide show me that is possible configure DHCP snooping in this switches, but web interface and console don't appear related menus/commands.Any idea?I'm using firmw...