I'm new on Cisco environment and I try to install a network with that.
I activate the L3 Mode to get router functionnalities for my SF300.
So, I create 2 VLAN (40 an 50). I affect some ports to this VLAN (VLAN 40= FE1 and FE2 and VLAN 50 = FE20 and FE21).
VLAN 40 (Admin) = 192.168.40.2
VLAN 50 (User) = 192.168.50.2
Now, I need that VLAN 40 and VLAN 50 communicate both. In fact, I want the computer ont VLAN 50 can reach some services hosted on VLAN 40. For that, I need establish a communication between them but I don't know how.