SFE2000 and broadcast controll

[andre.ortega]

Hi everyone,

Is possible configure broadcast limites by port in SFE2000?

Thanks.

[David Hornstein · Accepted solution]

Hi Andre,

Yes you have the option to set on a per interface basis the broadcast and multicast packet storm control, see my screen capture below from the SFE2000 big brother the SGE2000P.  The operating system is basically the same on the SGE2000 and the SFE2000.

if you have rate limiting already set on a interface it will take precedence over the broadcast rate limits that you set.

regards Dave

[andre.ortega]

Thanks David.