10-13-2013 12:05 PM
Hi,
I have two NAS. Each one from a different manufacturer, QNAP and Synology.
The two NAS support LACP IEEE802.3ad but in this way QNAP loses 40% of the packets and Synology not work.
With a Cisco Calatyst 3750 both NAS I work well. Do I have to do something in the SG200 to work?
Thank you.
10-20-2013 08:25 AM
Hi Felipe, you may want to check the load balance method the NAS uses. The Sx200 has a limited feature set compared to a 3750 in this regard.
-Tom
Please mark answered for helpful posts
10-21-2013 02:16 AM
Hi Tom,
I use the mode IEEE 802.3ad Dynamic Link Aggregation on the Synolgy and QNAP.
Maybe I should use another way?
Thank´s
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide