SG200-26P and LACP

[Felipe Martin]

Hi,

I have two NAS. Each one from a different manufacturer, QNAP and Synology.

The two NAS support LACP IEEE802.3ad but in this way QNAP loses 40% of the packets and Synology not work.

With a Cisco Calatyst 3750 both NAS I work well. Do I have to do something in the SG200 to work?

Thank you.

[Tom Watts]

Hi Felipe, you may want to check the load balance method the NAS uses. The Sx200 has a limited feature set compared to a 3750 in this regard.

-Tom
Please mark answered for helpful posts

[Felipe Martin]

Hi Tom,

I use the mode   IEEE 802.3ad Dynamic Link Aggregation on the Synolgy and QNAP.

Maybe I should use another way?

Thank´s