SG220-50P 50-Port Gigabit PoE Smart Switch's PoE Status is OFF

keithliew · ‎04-10-2023

Anyone have any idea why the PoE Status showed OFF for all ports for my switch SG220-50P 50-Port Gigabit PoE Smart Switch?

AccSW3#show power inline
Power management mode: Class limit mode
Legacy device supports: enabled
Unit Power Status Nominal Allocated Consumed Available Usage Traps
Power Power Power Power Threshold
---- ----- ------ -------- --------------- -------- --------- --------- -------
1 Off Normal 375Watts 0Watts (0%) 0Watts 375Watts 98 disabled

Port State Status Priority Class Max.Power Alloc.Power Device
(mW) (mW)
---- ----- ---------- -------- ------- --------- ----------- ----------------
gi1 Auto off low class0 15400 0 N/A
gi2 Auto off low class0 15400 0 N/A
gi3 Auto off low class0 15400 0 N/A
gi4 Auto off low class0 15400 0 N/A
gi5 Auto off low class0 15400 0 N/A
gi6 Auto off low class0 15400 0 N/A
gi7 Auto off low class0 15400 0 N/A
gi8 Auto off low class0 15400 0 N/A
gi9 Auto off low class0 15400 0 N/A
gi10 Auto off low class0 15400 0 N/A
gi11 Auto off low class0 15400 0 N/A
gi12 Auto off low class0 15400 0 N/A
gi13 Auto off low class0 15400 0 N/A
gi14 Auto off low class0 15400 0 N/A
gi15 Auto off low class0 15400 0 N/A
--More--

marce1000 · ‎04-10-2023

Check and or enable POE according to :

STEP 1 Click Port Management > PoE > Port Settings.
STEP 2 To edit the power limit per port, select a port and click Edit.
STEP 3 Enter the following information:
• Interface—Select the port to be configured.
• PoE Administrative Status—Enable or disable PoE on the port.

M.

-- Each morning when I wake up and look into the mirror I always say ' Why am I so brilliant ? '
When the mirror will then always repond to me with ' The only thing that exceeds your brilliance is your beauty! '