05-06-2019 02:35 PM
Hi again, I am slowly getting to the correct configuration thanks to a lot of assistance from this forum. I am at the point where the VLANs are created and I can access the internet from each device and I can ping devices on other VLANs. I can also access devices on the other VLANs however I cannot ping or access any devices on the default VLAN 1 (where I have my WAPs plugged in, shared printers etc.). More importantly while I can access the router (RV340) I cannot access the Switch from a computer connected to one of the VLANs.
What do I need to do? Thanks in advance - Jason
05-06-2019 02:44 PM
Hi @jasonreg416 ,
Could you make a diagram of your current network, explaining how your devices are configured?
Regards
05-06-2019 03:13 PM
I can try.
Internet Modem -> Router (RV340) -> (LAG on ports 2/3/4) Switch (SG250X-48). All devices including WAPs are wired into Switch. 3 VLANs are created 16, 18 and 20 for Home Office, Audio/Visual, SONOS. Shared printer is currently on VLAN 16. WAPS are on default VLAN 1 as are wireless connected devices. Does that make sense?
I can currently connect to other VLANs (i.e. control SONOS (VLAN 20) from my Home Office PC (VLAN 16)) but not from an iPhone on VLAN 1.
05-06-2019 03:41 PM
Interestingly I can ping the switch from a PC on VLAN 16 but cannot log into it …...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide