Switches - Small Business

Hello,I have a CISCO 2960S with two VLANs. One of the VLANs (VLAN 16) was removed by accident, following incorrect instructions from some old documentation. VLAN 16 was recreated and is now active and the protocol is up. There are about 32 ports with...

Hi    I am searching the information that indicates how many throughput do they have when stacked. According to this doc, the topology would be chain or ring, so I guess the throughput is 10Gbps or 20Gbps. https://www.cisco.com/c/en/us/support/docs/s...

Hello I am trying to monitor the temperature of the switch and I can not find OID. Can it be monitored or is it not supported?

Hello  i am looking for a upgrade for a very simple network there are two switches and i would like to know what mechanism i colud use i was thinking on spt or mst but because its just two switches i would like two know what its the best choice   tha...

Six months ago, we kicked off an Internal vulnerability scanner (IVS) and the CPU on a couple dozen SG300 switches pegged at 100% and stayed that way. We could SSH into them, but they wouldn't reboot when issuing the command, so we needed to walk bra...

Any increase in MTU above 1500 across my SG100-16 is causing a reduction in data copy performance, although large ICMP packets appear to be unmolested.A system to system copy of a GB file at an MTU of 1500 achieves an average of 104MB/sec and the sam...

Hello everyone,   first of all I want to describe our network topology:   We got two SG550XG switches. One fibre switch which connects to our access layer switches (also cisco) and one copper switch. They're both stacked.   Attached you could find cu...

Hi, I have a SG350XG (firmware 2.3.5.63) here that regularly produces the following warning: Mar 12 07:34:57 192.168.1.46 %NT_GREEN-W-EeeLldpMultiNeighbours: Multiple LLDP neighbours on port te1/0/18 - EEE operational state is FALSE Port te1/0/18 is ...

HI I WANT A CISCO L3 SWITCH WHICH HAVE 24 PORT 10/100/100 BASE T PORT AND 4 GBE/10GBE SFP/SFP+, HAVING STATIC&RIP ,STACKABLE UPTO 10 SWITCHES please suggest me the model of switch.

Hello to everyoneI'm currently trying to update the Firmware on three SG350-Switches. One is brand new (SG350-10P) and there I had no problems to step-up to the 2.4.5.71-Firmware.With the other two devices (SG350-28P and SG350-28MP), after uploading ...

Hi Experts, We have 6 Unifi AP Pro connected on a SG300 52 Port PoE Managed Switch. However, the link on the ports wont go up. We suspect its something in the PoE confiration of these ports. What should be the correct settings and what are the comman...