SG300 10MP boot code update

[Lawrence McCoy]

If there any procedure on how to update the boot code on a SG300 10MP, to 1.35.06?  I can't seen to find anything

Any help would be awesome

[Tom Watts]

Hi Lard, the boot can be loaded through TFTP. When you go to Admin -> File Management -> Upgrade/backup Firmware, you'll notice the boot option is grey when the HTTP/HTTPS is selected. If you choose the TFTP option everything becomes active.

If you don't have a TFTP server, you can download TFTPD32 (332 bit) or TFTPD64 (64 bit). It's free and very basic.