09-06-2018 03:34 AM
Hi.
We have SG300-10MP switches running 1.1.2.0 and 1.3.0.62. I want to upgrade to latest version 1.4.9.4. In release notes for version 1.4.9.4, it is written that switch first must be upgraded to version 1.3.5.x, but this version is not available for download. Only 1.1.x.x and 1.4.x.x versions are available for download.
It is also written in release notes that boot software has to be upgraded to 1.3.5.06, but this boot software version is also no available...
From release notes;
Upgrading from Versions Earlier than 1.3.5 When upgrading the device from version prior to 1.3.5: • For Sx200/Sx300 models, first upgrade the device image to image version 1.3.5.x and upgrade the boot file to 1.3.5.06
Solved! Go to Solution.
09-10-2018 01:08 AM
Hi,
My name is Ritesh Sharma from Cisco TAC.
As per the recommendation you first have to upgrade the switch to 1.3.5.X series frimware and boot code.
Both of them are available in cisco webside. Please find the link below to check for the same (please expand number 1, you will see all the firmware releases) :-
https://software.cisco.com/download/home/283019614/type/282463181/release/1.3.5.58
Please mark this as helpful if it resolves your query.
Thanks and regards
Ritesh Sharma
09-10-2018 01:08 AM
Hi,
My name is Ritesh Sharma from Cisco TAC.
As per the recommendation you first have to upgrade the switch to 1.3.5.X series frimware and boot code.
Both of them are available in cisco webside. Please find the link below to check for the same (please expand number 1, you will see all the firmware releases) :-
https://software.cisco.com/download/home/283019614/type/282463181/release/1.3.5.58
Please mark this as helpful if it resolves your query.
Thanks and regards
Ritesh Sharma
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide