Switches - Small Business

Kindly I am stacking 4 switches SG350X-24P. For the master switch , I am using two SFP+ ports for ring stacking. For the other two SFP+ ports , I will be using the other two ports for fiber up-link. I want to valide this design, is it tested by anyon...

Can I confirm that the SG110:   Does not support 802.1x VLANs i.e. 802.1pq Is not software upgradeable   Thanks  

is the SG series switches are under lifetime warranty ..?

We have  two brand new SG550XG-24F with Firmware 2.4.0.94. In the logs i see at least 2 fatal crashes. The Stack reboots twice within serveral hours. As this is our Core Switch witch several Access Switches connected, it stops the whole network for 1...

I have a old SRW2048 and work fine. I wish good to clean the internal fans or in the case replace them if they do not run well. As you open the switch to access the inside? Exist a video or a manual to open the switch? Thank's

Dear all,   3 switches SX500-XG are linked through a fiber optical modules without make a loop.   From many weeks a STP Warning (See bellow) comes. It doesn't matter for 90% of network device connected on 2 switches but for 5% of them, it makes some ...

Hello,   I have bought SG95-24 unmanaged switch. How do I access the switch through a browser? what is the default IP?

Hi Everyone,   my school bought recently two SG550xg switches. One Fibre Switch which connects to our access layer switches (also cisco) and one copper switch. They´re both stacked.   When the technician configured the DHCP relay with the following c...

In my server room having one SG300 layer 2 switch with layer 3 functionality , i need to restrict dhcp ip received from another lab switch, my server room switch and lab switch in connected with trunk link, i need to restrict second switch dhcp ip ad...

Hi Guys,   I have one Cisco SG300 28 port PoE switch, it is very slow when i am trying to access the shared folder from remote location (HO). HO and Branch office is connected via Site to Site VPN using Sonicwall. Same structure i am using in another...

Hi everybody!   I've been using an SG300 for quite some time now and I'm really happy with it. Now I've added two new WLAN-APs (TP-Link EAP 110), which I wanted to supply with juice via POE.   However, it neither works directly (at the switch or at t...

Hi All,   I am in the process of testing using a RADIUS server and an SG300-10 to authenticate wired clients on my network. It is mostly working but i have an strange issue which i am hoping someone can help me with. The RADIUS is configured to authe...

Hi all,   how many ACE can i add on my SG300-28 L3 switch? (i guess 256, am i right?)I also have some strange issue using the web management, sometimes when entering a new ACE it say "entry already exist", but it's not true, since the slot is empty  ...