Buy or Renew
Buy or Renew
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
cancel
Start a conversation
2934
Views
0
Helpful
3
Replies

SG350XG-24F changes media type on trunk ports from fiber to copper after attaching DAC cable on other port

QAMITS
Level 1
Level 1

‎05-06-2019 02:46 AM

Hello Community, this is my first post here and I hope to get an answer for a really weird behaviour.

 

We have a SG350XG-24F switch and attached to it a few HP ProLiant Server. NICs on HP servers are also with SFP+ slots. NICs are connected to SG350XG via Direct Attached Cable (DAC). On Ports 23 and 24 are optical transceivers connected and configured as trunk port. Via trunk port the switch is connected to other switches on other locations. Also the firewall is reachable via those trunk ports.

 

Now the issue. I got a new DAC cable with same specification like the other existing cables. It is just a little bit shorter. We have 5m cables and the new one is 3m. When I replace the existing and running cable with the new one on Port 11, my trunk ports on 23 and 24 go down because they change the media type from fiber to copper which is not working because it is fiber.

 

I have no idea why port 11 affects my trunk ports. Here a part of the log:

 

 

2147462699 2019-May-03 11:36:41 Informational %LINK-I-CHNGCOMBOMEDIA: Media changed from copper media to fiber media on port te1/0/24.
2147462700 2019-May-03 11:36:41 Warning %STP-W-PORTSTATUS: te1/0/23: STP status Forwarding
2147462701 2019-May-03 11:36:40 Informational %LINK-I-CHNGCOMBOMEDIA: Media changed from copper media to fiber media on port te1/0/23.
2147462702 2019-May-03 11:36:40 Informational %LINK-I-Up: te1/0/14
2147462703 2019-May-03 11:36:40 Warning %LINK-W-Down: te1/0/14
2147462704 2019-May-03 11:36:40 Informational %LINK-I-Up: te1/0/24
2147462705 2019-May-03 11:36:40 Informational %LINK-I-Up: Vlan 310
2147462706 2019-May-03 11:36:40 Informational %LINK-I-Up: Vlan 250
2147462707 2019-May-03 11:36:40 Informational %LINK-I-Up: Vlan 240
2147462708 2019-May-03 11:36:40 Informational %LINK-I-Up: Vlan 180
2147462709 2019-May-03 11:36:40 Informational %LINK-I-Up: Vlan 170
2147462710 2019-May-03 11:36:40 Informational %LINK-I-Up: Vlan 150
2147462711 2019-May-03 11:36:40 Informational %LINK-I-Up: Vlan 145
2147462712 2019-May-03 11:36:40 Informational %LINK-I-Up: Vlan 130
2147462713 2019-May-03 11:36:40 Informational %LINK-I-Up: Vlan 1
2147462714 2019-May-03 11:36:40 Informational %LINK-I-Up: te1/0/23
2147462715 2019-May-03 11:36:38 Informational %NSFP-I-SFPGibicRemoved: te1/0/11 SFP port is not present
2147462716 2019-May-03 11:36:38 Warning %LINK-W-Down: Vlan 310
2147462717 2019-May-03 11:36:38 Warning %LINK-W-Down: Vlan 250
2147462718 2019-May-03 11:36:38 Warning %LINK-W-Down: Vlan 170
2147462719 2019-May-03 11:36:38 Warning %LINK-W-Down: Vlan 150
2147462720 2019-May-03 11:36:38 Warning %LINK-W-Down: te1/0/11
2147462722 2019-May-03 11:35:37 Warning %LINK-W-Down: Vlan 240
2147462723 2019-May-03 11:35:37 Warning %LINK-W-Down: Vlan 180
2147462724 2019-May-03 11:35:37 Warning %LINK-W-Down: Vlan 145
2147462725 2019-May-03 11:35:37 Warning %LINK-W-Down: Vlan 130
2147462726 2019-May-03 11:35:37 Warning %LINK-W-Down: Vlan 1
2147462727 2019-May-03 11:35:37 Warning %LINK-W-Down: te1/0/24
2147462728 2019-May-03 11:35:35 Informational %LINK-I-CHNGCOMBOMEDIA: Media changed from fiber media to copper media on port te1/0/24.
2147462730 2019-May-03 11:35:16 Warning %LINK-W-Down: te1/0/23
2147462731 2019-May-03 11:35:15 Informational %LINK-I-CHNGCOMBOMEDIA: Media changed from fiber media to copper media on port te1/0/23.
2147462735 2019-May-03 11:29:14 Warning %STP-W-PORTSTATUS: te1/0/11: STP status Forwarding
2147462736 2019-May-03 11:29:10 Informational %LINK-I-Up: te1/0/11
2147462737 2019-May-03 11:29:10 Informational %NSFP-I-SFPGibicDetected: te1/0/11 SFP port is present

 

 

You can see when I plug in the DAC on Port 11 the media type on port 23 and 24 change and all VLANs go down. When I unplug the port 11 media type changes back and all is working.

 

Any ideas? Why can a cable attached to one port affect a total different port?

 

Thanks for your suggestions.

Andreas

 

Labels:
0 Helpful
3 Replies 3

balaji.bandi
Hall of Fame
Hall of Fame

‎05-06-2019 04:02 AM

can you post the config ?

 

BB

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help

0 Helpful

QAMITS
Level 1
Level 1
In response to balaji.bandi

‎05-06-2019 04:32 AM

------------------ show running-config ------------------
config-file-header
SWSRV2WHT23
v2.2.0.63 / RTESLA2.2_810_156_020
CLI v1.0
file SSD indicator excluded
@
!
unit-type-control-start
unit-type unit 1 network te uplink none
unit-type unit 2 network te uplink none
unit-type unit 3 network te uplink none
unit-type unit 4 network te uplink none
unit-type-control-end
!
vlan database
vlan 130,140,145,150,170,180,240,250,310
exit
voice vlan oui-table add 0001e3 Siemens_AG_phone________
voice vlan oui-table add 00036b Cisco_phone_____________
voice vlan oui-table add 00096e Avaya___________________
voice vlan oui-table add 000fe2 H3C_Aolynk______________
voice vlan oui-table add 0060b9 Philips_and_NEC_AG_phone
voice vlan oui-table add 00d01e Pingtel_phone___________
voice vlan oui-table add 00e075 Polycom/Veritel_phone___
voice vlan oui-table add 00e0bb 3Com_phone______________
ip dhcp relay address 192.168.140.10
ip dhcp relay enable
ip dhcp information option
bonjour interface range oob
hostname "hidden"
line console
exec-timeout 5
exit
line ssh
exec-timeout 5
exit
line telnet
exec-timeout 5
exit
line console
no autobaud
exit
management access-list QAM
permit
exit
management access-class QAM
no passwords complexity enable
passwords aging 0
username admin password encrypted "hidden" privilege 15
ip ssh server
ip ssh password-auth
snmp-server server
snmp-server location "WHT 23. OG"
snmp-server contact ITSYSTEMS
no snmp-server trap authentication
snmp-server filter System system included
snmp-server filter Interfaces interfaces included
snmp-server community QAMGMBH ro view Default
snmp-server community QAMGMBH ro "hidden" view Default
snmp-server host "hidden" informs version 2c QAMGMBH
snmp-server group "hidden" v2
ip http timeout-policy 300
no ip http server
clock timezone " " +1
clock summer-time web recurring eu
sntp server "hidden" poll
sntp server "hidden" poll
ip domain name "hidden"
ip name-server  "hidden"
ip domain polling-interval 18
security-suite enable global-rules-only
security-suite dos protect add stacheldraht
security-suite dos protect add invasor-trojan
security-suite dos protect add back-orifice-trojan
!
interface vlan 130
 name ffm_clt
!
interface vlan 140
 name ffm_srv
!
interface vlan 145
 name ffm_test
!
interface vlan 150
 name ffm_dmz
!
interface vlan 170
 name ffm_dmz_ext_router
!
interface vlan 180
 name ffm_sw_dmz_mgmt
 ip address "hidden"
!
interface vlan 240
 name esh_srv
!
interface vlan 250
 name esh_dmz
!
interface vlan 310
 name ffm_exchange
!
interface TengigabitEthernet1/0/1
 spanning-tree link-type point-to-point
 macro description switch
!
interface TengigabitEthernet1/0/2
 spanning-tree link-type point-to-point
 macro description switch
!
interface TengigabitEthernet1/0/4
 spanning-tree link-type point-to-point
 macro description switch
!
interface TengigabitEthernet1/0/5
 description "zu VMESXi-3 Port 1"
 switchport access vlan 140
!
interface TengigabitEthernet1/0/6
 description "zu VMESXi-4 Port 2"
 switchport access vlan 140
!
interface TengigabitEthernet1/0/7
 description "zu VMESXi-10 Port 1"
 switchport mode trunk
 switchport trunk allowed vlan remove 1-139,141-144,146-4094
!
interface TengigabitEthernet1/0/8
 description "zu VMESXi-10 Port 2"
 switchport mode trunk
 switchport trunk allowed vlan remove 1-129,131-4094
!
interface TengigabitEthernet1/0/9
 description "zu VMESXi-20 Port 1"
 switchport mode trunk
 switchport trunk allowed vlan remove 1-139,141-144,146-4094
!
interface TengigabitEthernet1/0/10
 description "zu VMESXi-20 Port 2"
 switchport mode trunk
 switchport trunk allowed vlan remove 1-129,131-4094
!
interface TengigabitEthernet1/0/11
 description "zu VMESXi-6 Port 2"
 switchport mode trunk
 switchport trunk allowed vlan remove 1-149,151-169,171-249,251-309
 switchport trunk allowed vlan remove 311-4094
!
interface TengigabitEthernet1/0/12
 description "zu VMESXi-13 Port 1"
 switchport access vlan 140
!
interface TengigabitEthernet1/0/13
 description "zu VMESXi-18 Port 1"
 switchport access vlan 140
!
interface TengigabitEthernet1/0/14
 speed 1000
 description "zu VMESXi-22 Port 2"
 switchport access vlan 140
!
interface TengigabitEthernet1/0/21
 switchport mode trunk
!
interface TengigabitEthernet1/0/22
 spanning-tree link-type point-to-point
 switchport mode trunk
 macro description switch
!
interface TengigabitEthernet1/0/23
 description "*** zu SWSRV2WHT22 Port 23 ***"
 spanning-tree link-type point-to-point
 switchport mode trunk
 macro description switch
 !next command is internal.
 macro auto smartport dynamic_type switch
!
interface TengigabitEthernet1/0/24
 description "*** zu SW2WHT22 Port 23 ***"
 spanning-tree link-type point-to-point
 switchport mode trunk
 macro description "switch "
 !next command is internal.
 macro auto smartport dynamic_type switch
!
exit
ip dhcp snooping
ip dhcp snooping information option allowed-untrusted
ip default-gateway "hidden"

 

------------------ show interfaces configuration ------------------
                                               Flow    Admin     Back   Mdix
Port     Type         Duplex  Speed  Neg      control  State   Pressure Mode
-------- ------------ ------  -----  -------- -------  -----   -------- ----
te1/0/1  10G-Fiber    Full    10000  Disabled Off      Up      Disabled Off
te1/0/2  10G-Fiber    Full    10000  Disabled Off      Up      Disabled Off
te1/0/3  10G-Fiber    Full    10000  Disabled Off      Up      Disabled Off
te1/0/4  10G-Fiber    Full    10000  Disabled Off      Up      Disabled Off
te1/0/5  10G-Fiber    Full    10000  Disabled Off      Up      Disabled Off
te1/0/6  10G-Fiber    Full    10000  Disabled Off      Up      Disabled Off
te1/0/7  10G-Fiber    Full    10000  Disabled Off      Up      Disabled Off
te1/0/8  10G-Fiber    Full    10000  Disabled Off      Up      Disabled Off
te1/0/9  10G-Fiber    Full    10000  Disabled Off      Up      Disabled Off
te1/0/10 10G-Fiber    Full    10000  Disabled Off      Up      Disabled Off
te1/0/11 10G-Fiber    Full    10000  Disabled Off      Up      Disabled Off
te1/0/12 10G-Fiber    Full    10000  Disabled Off      Up      Disabled Off
te1/0/13 10G-Fiber    Full    10000  Disabled Off      Up      Disabled Off
te1/0/14 10G-Fiber    Full    1000   Disabled Off      Up      Disabled Off
te1/0/15 10G-Fiber    Full    10000  Disabled Off      Up      Disabled Off
te1/0/16 10G-Fiber    Full    10000  Disabled Off      Up      Disabled Off
te1/0/17 10G-Fiber    Full    10000  Disabled Off      Up      Disabled Off
te1/0/18 10G-Fiber    Full    10000  Disabled Off      Up      Disabled Off
te1/0/19 10G-Fiber    Full    10000  Disabled Off      Up      Disabled Off
te1/0/20 10G-Fiber    Full    10000  Disabled Off      Up      Disabled Off
te1/0/21 10G-Fiber    Full    10000  Disabled Off      Up      Disabled Off
te1/0/22 10G-Fiber    Full    10000  Disabled Off      Up      Disabled Off
te1/0/23 10G-Combo-F  Full    10000  Enabled  Off      Up      Disabled Auto
te1/0/24 10G-Combo-F  Full    10000  Enabled  Off      Up      Disabled Auto

                                  Flow    Admin
Ch       Type    Speed  Neg      control  State
-------- ------- -----  -------- -------  -----
Po1         --     --   Enabled  Off      Up     
Po2         --     --   Enabled  Off      Up     
Po3         --     --   Enabled  Off      Up     
Po4         --     --   Enabled  Off      Up     
Po5         --     --   Enabled  Off      Up     
Po6         --     --   Enabled  Off      Up     
Po7         --     --   Enabled  Off      Up     
Po8         --     --   Enabled  Off      Up     

                                               Admin
Oob       Type         Duplex  Speed  Neg      State
--------  ------------ ------  -----  -------- -----
oob       1G-Copper    Full    1000   Enabled  Up     
------------------ show interfaces status ------------------
                                             Flow Link          Back   Mdix
Port     Type         Duplex  Speed Neg      ctrl State       Pressure Mode
-------- ------------ ------  ----- -------- ---- ----------- -------- -------
te1/0/1  10G-Fiber      --      --     --     --  Down           --     --   
te1/0/2  10G-Fiber      --      --     --     --  Down           --     --   
te1/0/3  10G-Fiber      --      --     --     --  Down           --     --   
te1/0/4  10G-Fiber      --      --     --     --  Down           --     --   
te1/0/5  10G-Fiber    Full    10000 Disabled Off  Up          Disabled Off   
te1/0/6  10G-Fiber    Full    10000 Disabled Off  Up          Disabled Off   
te1/0/7  10G-Fiber    Full    10000 Disabled Off  Up          Disabled Off   
te1/0/8  10G-Fiber    Full    10000 Disabled Off  Up          Disabled Off   
te1/0/9  10G-Fiber    Full    10000 Disabled Off  Up          Disabled Off   
te1/0/10 10G-Fiber    Full    10000 Disabled Off  Up          Disabled Off   
te1/0/11 10G-Fiber    Full    10000 Disabled Off  Up          Disabled Off   
te1/0/12 10G-Fiber      --      --     --     --  Down           --     --   
te1/0/13 10G-Fiber    Full    10000 Disabled Off  Up          Disabled Off   
te1/0/14 10G-Fiber    Full    1000  Disabled Off  Up          Disabled Off   
te1/0/15 10G-Fiber      --      --     --     --  Down           --     --   
te1/0/16 10G-Fiber      --      --     --     --  Down           --     --   
te1/0/17 10G-Fiber      --      --     --     --  Down           --     --   
te1/0/18 10G-Fiber      --      --     --     --  Down           --     --   
te1/0/19 10G-Fiber      --      --     --     --  Down           --     --   
te1/0/20 10G-Fiber      --      --     --     --  Down           --     --   
te1/0/21 10G-Fiber      --      --     --     --  Down           --     --   
te1/0/22 10G-Fiber      --      --     --     --  Down           --     --   
te1/0/23 10G-Combo-F  Full    10000 Enabled  Off  Up          Disabled Off   
te1/0/24 10G-Combo-F  Full    10000 Enabled  Off  Up          Disabled Off   

                                          Flow    Link       
Ch       Type    Duplex  Speed  Neg      control  State      
-------- ------- ------  -----  -------- -------  -----------
Po1         --     --      --      --       --    Not Present
Po2         --     --      --      --       --    Not Present
Po3         --     --      --      --       --    Not Present
Po4         --     --      --      --       --    Not Present
Po5         --     --      --      --       --    Not Present
Po6         --     --      --      --       --    Not Present
Po7         --     --      --      --       --    Not Present
Po8         --     --      --      --       --    Not Present

                                              Link
Oob       Type         Duplex  Speed Neg      State
--------  ------------ ------  ----- -------- -----------
oob       1G-Copper      --      --     --    Down       
------------------ show interfaces port-channel ------------------

Load balancing: src-dst-mac.

Gathering information...
Channel  Ports
-------  -----
Po1    
Po2    
Po3    
Po4    
Po5    
Po6    
Po7    
Po8    

0 Helpful

balaji.bandi
Hall of Fame
Hall of Fame
In response to QAMITS

‎05-06-2019 05:08 AM

High level some STP loop i can see here

 

Warning %STP-W-PORTSTATUS: te1/0/23: STP status Forwarding

 

Can you please explain te1/0/23 te1/0/24 and 1/0/11 how they are connected ? do you have any network topology ?

 

BB

***** Rate All Helpful Responses *****

How to Ask The Cisco Community for Help

0 Helpful
Customers Also Viewed These Support Documents