06-13-2019 06:51 AM
I have two stacked SG500-52P units. These units were power cycled last night due to our UPS becoming exhausted after an extended power failure. Since coming back up a certain bank of port (7-12, 31-36) have been having POE issue. They will show large amounts of Invalid Signature Counter and/or Denied Counters. This is the second switch in the stack.
Way under power budget only using 110W on this switch.
My concern is that the switch is now just "flakey" and cannot be trusted unless there is some known issue? I see similar posts on here about this same issue so maybe there is a firmware upgrade? I am running 1.4.9.4.
06-13-2019 08:19 AM
Hi James,
It sounds like there may be an issue with the PoE delivery on these ports. Can you please open a ticket so we can investigate and let you know the next steps?
Please open a service request with us by contacting our frontline number; accordingly we can investigate further on this issue. Please follow the below mentioned link to contact us…
https://www.cisco.com/c/en/us/support/web/tsd-cisco-small-business-support-center-contacts.html
06-13-2019 08:22 AM
@ktonev wrote:Hi James,
It sounds like there may be an issue with the PoE delivery on these ports. Can you please open a ticket so we can investigate and let you know the next steps?
Please open a service request with us by contacting our frontline number; accordingly we can investigate further on this issue. Please follow the below mentioned link to contact us…
https://www.cisco.com/c/en/us/support/web/tsd-cisco-small-business-support-center-contacts.html
I tried, but they refused to open a ticket since the units are out of warranty? I will try again.
-jr
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide