SRW2048 unable to console in

[VictorVEnciso]

So I decided to purchase a SRW2048 for a switch and now that I have it the previous owner must of had changed up the port and web gui ip since i cannot console in

I use Hyper Terminal with these settings

Bits per second : 38400
Data bits: 8 

Parity: None

Stop Bits : 1

Flow control : None

And I still get nothing 

[Brandon Svec]

Hi Victor, you probably need to find or make a different cable than you are used to.  See here:

http://community.linksys.com/t5/Switches/Console-cable/m-p/85004?query.id=92299

[VictorVEnciso]

This is what I bought ; 

http://www.monoprice.com/Product?c_id=102&cp_id=10212&cs_id=1021205&p_id=477&seq=1&format=2

http://www.monoprice.com/Product?c_id=103&cp_id=10311&cs_id=1031104&p_id=3726&seq=1&format=2

[Brandon Svec · Accepted solution]

Right, you bought a null modem cable wich is common, but according to the thread I linked to you will need a straight cable to console into this switch.

[VictorVEnciso]

Ohhhhh. Okay so Im assuming I need this one then?

http://www.monoprice.com/Product?c_id=102&cp_id=10212&cs_id=1021201&p_id=448&seq=1&format=2

[Brandon Svec]

Yes, that look right to me.

[VictorVEnciso]

Thank you very much!!!

That did the trick and now when I connect to console I can see everything! :)

Thanks.

/RESOLVED