10G switch

[W. Rodney Maloney]

Can you tell me what switch I would need that have 10g rj45 ports?  I have looked at the 3850 but have not found anything that would accomplish what I am looking for, your help would be greatly appreciated.

[Leo Laohoo]

Can you tell me what switch I would need that have 10g rj45 ports? 

None.

[Julio E. Moisa]

Hi 

I agree with Leo, none switch has 10G ports for RJ45. You need to use SFP module like SFP-10G-SR / LR or probably other type of SFP's (fiber all of them), for example below you will find the link about the Cisco 4500X:

http://www.cisco.com/c/en/us/products/collateral/switches/catalyst-4500-x-series-switches/data_sheet_c78-696791.html

Hope it is useful

:-)

[Iulian Vaideanu]

What about 4900M with WS-X4908-10G-RJ45?

http://www.cisco.com/c/en/us/products/collateral/switches/catalyst-4900-series-switches/product_bulletin_c25-575166.html

Also, there are two XU C3850 models with UPOE mGig ports, and there should be several 10GBase-T Nexus models...

[Joseph W. Doherty]

I recall (?) some of the Catalyst chassis switches support line blades with native copper 10g ports.

I'm unsure, but some Catalyst 10g SFP ports may support copper transceivers.

[Joseph W. Doherty]

Ah, for an appliance switch, found the SG350XG-24T 24-Port 10GBase-T Stackable.  Also found the EoL (?) 4900M supported 8 port 10GBase-T modules.

For DC usage, found the Nexus 2232TM Fabric Extender.

For a chassis, found the Catalyst 4500E 48-Port UPOE with 12 mGig ports RJ45 Line Card.

(More about Catalyst with mGig capable ports might be found here: http://www.cisco.com/c/en/us/solutions/enterprise-networks/catalyst-multigigabit-switching/index.html?dtid=osscdc000283&stickynav=1)

[W. Rodney Maloney]

thank you all, I appreciate all the help.

[Reza Sharifi]

I have several 3850s all with 24 port 10Gig copper (rj45).

part number WS-C3850-24XU

HTH

[Leo Laohoo]

part number WS-C3850-24XU

Thanks, Reza.  I didn't know about this.

[Reza Sharifi]

Sure Leo.

The 10Gig 3850 has been out for over 18 months now.  I deployed them at the end of 2015.

Thanks,

Reza

[Leo Laohoo]

The 10Gig 3850 has been out for over 18 months now.  I deployed them at the end of 2015.

Nice.

[Elrick Landon]

Hi,

I'm looking for switch with 10gbe copper or SFP+, if the switch can offer both possibility, why not ;)

Someone know if Cisco have something ?

Best Regards.

[Elrick Landon]

Up