cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
519
Views
0
Helpful
3
Replies

1811w went into romon

mahesh parmar
Level 1
Level 1

Hi all,

After restarting the 1811w went into romon.

i try the xmodem command it shows

rommon 2 > xmodem -c c181x-adventerprisek9-mz.151-4.M6

Do not start the sending program yet...

dir: cannot open device "flash:"

WARNING: All existing data in bootflash will be lost!

Invoke this application only for disaster recovery.

Do you wish to continue? y/n  [n]:  y

ERR: Not enough memory to download image

is there any command  that can erase ios from flash when in romon mode?

Regards

mahesh

1 Accepted Solution

Accepted Solutions

Leo Laohoo
Hall of Fame
Hall of Fame
ERR: Not enough memory to download image

The IOS you intended to use cannot boot because the IOS requires more DRAM/Flash than what your router has.

is there any command  that can erase ios from flash when in romon mode?

Command:  del flash:filename.extension

View solution in original post

3 Replies 3

Leo Laohoo
Hall of Fame
Hall of Fame
ERR: Not enough memory to download image

The IOS you intended to use cannot boot because the IOS requires more DRAM/Flash than what your router has.

is there any command  that can erase ios from flash when in romon mode?

Command:  del flash:filename.extension

Hi Leo,

Thanks for help.

Seems Compact flash card in front of router pop up for some reason it put the card back and router booted the ios.

Before this i try so many different things but it was not booting from flash as router was not seeing the flash.

Sometimes small things cause big issues

Regards

Mahesh

LOL.

Thanks Mahesh.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Review Cisco Networking products for a $25 gift card