1941 wan card support

[r.kukreja]

How many HWIC card can be support in 1941 router,whether HWIC-1T OR HWIC2T. is HWIC-1T card able to deliver throughput >2mbps and HWIC-2T throughput>4mbps

[Collin Clark]

See attached image for quantity support. Each interface is limited to 1.54mb. About the only you could do is use the 2 port card and bundle the two links to get 3mb.

[r.kukreja]

so if throughput is 1.54 mb of EHWIC-1T  then what is meaning of enhanced high speed

and you mean to say either 2 HWIC-IT or 2 HWIC-2T

[SunilKhanna]

This should help you,

Cisco 1941 Series Integrated Services Routers

Connecting Gigabit Ethernet High-Speed WAN  Interface Cards (EHWIC 1 GE-SFP-CU)

[r.kukreja]

is WIC-IT  or WIC-2T card  can be support by 1941 . is wic-it or wic-2t size is same and how many wic-it or wic-2t card can be support by 1941. i want to install 2 mbps link on wic-1t card, is it right option to go

regards,

rajat

[Alexander Maroukian]

Hi,

You can use 2 HWIC cards on 1900 .Each HWIC-1, -2 support up to 8 Mbps in syncronious mode.

Check this link:

http://www.cisco.com/en/US/prod/collateral/modules/ps5949/datasheet_c78-491363.html

Regards,

Alex

[Collin Clark]

alexander770 wrote:
Hi,
You can use 2 HWIC cards on 1900 .Each HWIC-1, -2 support up to 8 Mbps in syncronious mode.
Check this link:
http://www.cisco.com/en/US/prod/collateral/modules/ps5949/datasheet_c78-491363.html
Regards,
Alex

Good find Alex, Thanks

[Alexander Maroukian]

I am glad that you like it Collin, I hope Rajat will find it useful too.

Regards,

Alex