cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
3214
Views
0
Helpful
6
Replies

2950 Switch not allowing me to set up SSH?

jpedersm1
Level 1
Level 1

After setting up the domain name I try to use the crypto key and it is no where to be located, any ideas if there is something wrong?  Below is some of the information I copied from TeraTerm

Switch-1(config)#ip domain-name justin.lab.com
Switch-1(config)#cry
Switch-1(config)#cry?
% Unrecognized command
Switch-1(config)#crypto key ?
% Unrecognized command
Switch-1(config)#crypto key
                  ^
% Invalid input detected at '^' marker.

Switch-1(config)#?
Configure commands:
  aaa                         Authentication, Authorization and Accounting.
  access-list                 Add an access list entry
  alias                       Create command alias
  arp                         Set a static ARP entry
  banner                      Define a login banner
  boot                        Boot Commands
  buffers                     Adjust system buffer pool parameters
  cdp                         Global CDP configuration subcommands
  clock                       Configure time-of-day clock
  cluster                     Cluster configuration commands
  cns                         CNS agents
  default                     Set a command to its defaults
  default-value               Default character-bits values
  define                      interface range macro definition
  do                          To run exec commands in config mode
  dot1x                       Dot1x Global Configuration Commands
  downward-compatible-config  Generate a configuration compatible with older
                              software
  enable                      Modify enable password parameters
  end                         Exit from configure mode
  errdisable                  Error disable
--More--

And here is the version on the switch

witch-1#show version
Cisco Internetwork Operating System Software
IOS (tm) C2950 Software (C2950-I6Q4L2-M), Version 12.1(22)EA14, RELEASE SOFTWARE (fc1)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2010 by cisco Systems, Inc.
Compiled Tue 26-Oct-10 10:35 by nburra
Image text-base: 0x80010000, data-base: 0x80570000

ROM: Bootstrap program is C2950 boot loader

Switch-1 uptime is 2 hours, 11 minutes
System returned to ROM by power-on
System image file is "flash:/c2950-i6q4l2-mz.121-22.EA14.bin"

cisco WS-C2950-24 (RC32300) processor (revision J0) with 20956K bytes of memory.
Processor board ID FHK0719Z1R8
Last reset from system-reset
Running Standard Image
24 FastEthernet/IEEE 802.3 interface(s)

32K bytes of flash-simulated non-volatile configuration memory.
Base ethernet MAC Address: 00:0D:28:2B:AB:80
Motherboard assembly number: 73-5781-11
Power supply part number: 34-0965-01
Motherboard serial number: FOC0719078W
Power supply serial number: DAB07195C7Q
Model revision number: J0
Motherboard revision number: A0
Model number: WS-C2950