2960 and 3750 intervlan routing help

[simon clarke]

Hi 

i was helping a friend with a lab today and we had 1x 2960 switch and 1 x 3750 switch and wanted to route between vlans 1 on vlan 30 1 on vlan 40.

we had our pc's plugged into the respective vlan's on the layer 2 switch and could ping the SVI on the layer 3 switch but could not route between the vlans i checked that ip routing was enabled but still no joy.

i would appreciate it if someone could have a look at the configs and tell me where i went wrong.

Thanks in advance 

Simon 

[simon clarke]

layer 2 switch config 

witch#sh vlan

VLAN Name Status Ports
---- -------------------------------- --------- -------------------------------
1 default active Fa0/1, Fa0/2, Fa0/3, Fa0/4
Fa0/5, Fa0/6, Fa0/7, Fa0/8
Fa0/9, Fa0/10, Fa0/11, Fa0/12
Fa0/15, Fa0/16, Fa0/17, Fa0/18
Fa0/19, Fa0/20, Fa0/21, Fa0/22
Fa0/23, Gi0/1, Gi0/2
30 JOHN active Fa0/13
40 SIMON active Fa0/14
1002 fddi-default act/unsup
1003 token-ring-default act/unsup
1004 fddinet-default act/unsup
1005 trnet-default act/unsup

VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1 Trans2
---- ----- ---------- ----- ------ ------ -------- ---- -------- ------ ------
1 enet 100001 1500 - - - - - 0 0
30 enet 100030 1500 - - - - - 0 0
40 enet 100040 1500 - - - - - 0 0
1002 fddi 101002 1500 - - - - - 0 0
1003 tr 101003 1500 - - - - - 0 0
1004 fdnet 101004 1500 - - - ieee - 0 0
1005 trnet 101005 1500 - - - ibm - 0 0

Remote SPAN VLANs
------------------------------------------------------------------------------

Primary Secondary Type Ports
------- --------- ----------------- ------------------------------------------

Switch#
Switch#
Switch#
Switch#

Switch#sh run interface fast
Switch#sh run interface fastEthernet 0/24
Building configuration...

Current configuration : 94 bytes
!
interface FastEthernet0/24
switchport trunk allowed vlan 30,40
switchport mode trunk
end

[Diana Karolina Rojas]

Hello!

You have to create the vlans in layer 2 in the 3750 (vlan 30 and vlan 40),  try it and tell me the result.

----------------Do not forget to rate useful answers------------

Regards,