05-10-2022 08:39 AM
I've setup ssh logins on my older 2960s and I get a warning that I can't find anything to clear. Here are the settings I have.
AAA
aaa authentication login telnet local
aaa authentication enable default enable
aaa authentication dot1x default group radius
aaa authorization network default group radius
Line settings
login authentication ssh
transport input ssh
When I entered login authentication ssh above I received the following message:
AAA: Warning authentication list “ssh” is not defined for LOGIN
Everything is working though... Am I missing something in AAA?
Thanks in advance...
Blind
Solved! Go to Solution.
05-10-2022 08:48 AM
Try to add on the 'line vty 0 15' the command 'login local'
05-10-2022 08:48 AM
check this example
some command missing and some command is wrong
05-10-2022 08:48 AM
Try to add on the 'line vty 0 15' the command 'login local'
05-10-2022 08:48 AM
check this example
some command missing and some command is wrong
05-10-2022 09:07 AM
Thanks... A little bit of both cleared the issue.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide