2960 SSH setup warning message

[rsblind]

I've setup ssh logins on my older 2960s and I get a warning that I can't find anything to clear. Here are the settings I have.

AAA

aaa authentication login telnet local

aaa authentication enable default enable

aaa authentication dot1x default group radius

aaa authorization network default group radius

Line settings

login authentication ssh

transport input ssh

When I entered login authentication ssh above I received the following message:

AAA: Warning authentication list “ssh” is not defined for LOGIN

Everything is working though... Am I missing something in AAA?

Thanks in advance...

Blind

[Flavio Miranda · Accepted solution]

Try to add on the 'line vty 0 15' the command 'login local'

[MHM Cisco World · Accepted solution]

https://www.firewall.cx/cisco-technical-knowledgebase/cisco-routers/1100-cisco-routers-ssh-support-configuration-rsa-key-generation.html

check this example 
some command missing and some command is wrong 

[rsblind]

Thanks... A little bit of both cleared the issue.