08-11-2011 12:06 PM - edited 03-07-2019 01:39 AM
Hi
im looking to purchase a couple of
WS-C2960S-48LPS-L
or
WS-C2960S-24TS-L
and stack them using
WS-C2960S-STACK
do they come with stacking cables? or will they have to be purchased separately?
im used to 3750's that come with the stacking cables.
Thankyou
08-11-2011 12:18 PM
When you purchase that stack module you get a 0.5M (50cm) stack cable with it.
Hope it helps.
08-11-2011 12:21 PM
thank you very much Collin
08-11-2011 07:30 PM
Hi Morris,
The below mentioned are the part-code of the stack cables. By default when you purchase a switch you will get 0.5M stack cable.
If you want a longer stack cable, then you should order for it by using the part id mentioned below.
The maximum length would be 3 metres.
Cisco Catalyst 2960-S FlexStack stacking cables:
=======================================
1. CAB-STK-E-0.5M FlexStack stacking cable with a 0.5 m length
2. CAB-STK-E-1M FlexStack stacking cable with a 1.0 m length
3. CAB-STK-E-3M FlexStack stacking cable with a 3.0 m length
Hope this helps
Cheers
Somu
Rate helpful posts
03-10-2018 12:27 AM
Thanks Collin, helpful info
03-10-2018 12:36 AM
If you are going to stack like 4+ you will need to order the longer stack cables separately, cause .5 meter aint gonna stack much
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide