07-15-2014
11:51 AM
- last edited on
03-25-2019
04:29 PM
by
ciscomoderator
I want to upgrade the IOS image of my cisco WS-C2970G-24-TS-E model switch from c2970-lanbase-mz.122-25.SEB2.bin (current image).
I found a new image-c2970-lanbase-mz.122-44.SE6.bin , but is for C2970G-24-TS model. So my doubt is, whether C2970G-24-TS and C2970G-24-TS-E one and the same or not???
07-15-2014 01:47 PM
Hi,
Have a look at this link:-
http://www.cisco.com/c/en/us/products/collateral/switches/catalyst-2970-series-switches/prod_qas09186a00801b1750.html
Table 1. Cisco Catalyst 2970 Series Switch Configurations
Your WS-C2970G-24-TS-E is the part number for a Catalyst 2970G-24TS
So the IOS you could upgrade to is
c2970-lanbase-mz.122-44.SE6.bin
Hope this helps
Regards
Alex
Please rate useful posts
11-04-2017 10:32 PM
Pl share link to download at digitec786@gmail.com.
07-15-2014 08:10 PM
Thanks a lot .
05-23-2017 11:21 AM
I have the same problem but 3 years later and that page referenced doesn't exist anymore. Is it possible to get the latest IOS version available for the Cisco Catalyst 2970G-24TS Switch?
08-25-2020 03:37 PM - edited 08-25-2020 03:37 PM
Also having the same issue. It's pretty ridiculous that a company like Cisco (which makes a cool ~$11 billion in profit) can't just keep a webpage up for it's EoL switches. I get that I'm not gonna get priority support but... I'd sure like to at least update my switch to the latest IOS.
Too much to ask, guys? C'mon.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide