Hello, Cisco Community!I’m really happy to share that I’ll be hosting the Cisco Community Lab Series, a brand-new hands-on learning journey designed to help you build practical networking skills step by step.Every Thursday at 8 PM EST, I’ll post a ne...
Forum Posts
Hi ..I have a confusion that ,What will happen to the clent network, if the VTP server has been removed from network when there is no secondary vtp server exists ..Also please Regards,Vasanth R
Hi, Need your help to to suggest command to check Tx/Rx power output on switch like we get from(sh int transceiver),is there any other command to check this on cat 4500 SUP 6E as sh int Gi x/x transceiver de is not working on this platform.
Hi all,Can someone help me to get solution with my issue?I have a cisco 3750X switch and I want to filtering certain prases in log buffer. I don't want recieve them in log buffer.I tried to use such rule, but no results:logging discriminator nolog mn...
Hi,On the GigabitEthernet 7 interface I have two vlans added. 7.19 and 7.18. Vlan 7.18 - 10.10.4.0/24. Vlan 7.19 - 10.10.1.0/24. Vlan has DHCP added. Vlan is added to unifi switch, ports on switch set to vlan. Nat rules added internet output for vlan...
Hello, Kindly assist with command to config password aging and password history on 2960 switches. Tried some commands but not compatible.
Hi everyone. I am doing an Embedded Packet Capture on a 9300 switch and I have attached a packet filter on the capture:#show monitor capture ul Status Information for Capture ul Target Type: Interface: GigabitEthernet1/1/1, Direction: BOTH Inter...
Hi all,I have two WS-4500X-32 switches that are running in VSS mode.Current IOS XE version is 03.06.05.E.152-2.E5 and current ROMMON Image is 15.0(1r)SG10. I want to upgrade IOS XE image to SPA.03.11.02.E.152-7. My main question do I need to upgrade ...
Here's the issue. No matter what I try, I cannot seem to get Po1 and Po2 out of the SD state. Please help.
Okay I'm beat. I have been trying to work on a set of commands in order to execute out of hours upgrade to 9200. I have been able to achieve this with a process that prepositioning the software using the WEBUI and then scheduling a reload in CLI; but...
I have newly two stacked switch C 9300 I will replace their with core 3750What's the best practise for the new design for network?
Greetings fellow Cisco colleagues! After a long troubleshooting period and finally tracing down the issue, we have now confirmed that on our network we have multiple clients DDoS ARP Requesting which spikes our CPU and causes packet drops. Hence I am...
Hello Team, We have stack 3650/3850 switch on the network with IOS version 16.3.7 , after PVST to MST upgrade..seeing no spanning-tree vlan x, y vlan on the configuration.Just want to understand the reason for this or any future issue because of thi...
hi, can someone advise what's the equivalent command in a nexus switch for "aaa authorization console"? N5K(config)# aaa authorization ?commands Authorization for all exec-mode comamndsconfig-commands Authorization for config comamndsssh-certificate ...
Hi to everyoneI just started to learn about network architecture and I was wondering if someone can help me with a simple example of Virtualization process in Packet Tracer. Thanks JC
