02-02-2015 11:41 AM - edited 03-07-2019 10:28 PM
Hi all,
can i upgrade two 6500 whit just one SUP each one using FSU(fast software upgrade) ?
tks all
02-02-2015 01:29 PM
I don't you'll see any benefits with FSU and a single supervisor card. I also don't think FSU is supported at the SXH-level IOS.
02-03-2015 01:40 AM
Tks for your replay, any advise??
regards
02-03-2015 12:59 PM
any advise??
1. Copy the IOS from the Cisco website;
2. Read the Release Notes carefully;
3. Verify the MD5 hash value of the file copied and compare against the MD5 hash value found in the Cisco website;
3. Copy the IOS from the TFTP server to the chassis: copy tftp://<TFTP IP Address>/filename.bin sup-bootflash:
4. Change the boot variable string so the new IOS gets booted first and the old IOS as a backup:
config t
no boot system flash
boot system flash sup-bootflash:NEW_IOS.bin
boot system flash sup-bootflash:OLD_IOS.bin
end
wr
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide