cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
570
Views
5
Helpful
5
Replies
Peter So
Beginner

33.0.0.0/8 is variably subnetted ??

擷取.PNG擷取1.PNG擷取2.PNG

 

Hello all. I am doing rip route (not version 2). Why 33.0.0.0/8 is variably subnetted (photo attached) ?????

I want to conf rip #network 33.20.5.0 and #network 33.20.4.0. But it finally show #33.0.0.0 in #sh run (photo attached). Why turn to 8 bits? How can I fix it ?? 

1 ACCEPTED SOLUTION

Accepted Solutions

Hello,

 

I don't see any networks announced under the RIP process. You need to add:

 

router rip

version 2

network 33.0.0.0

no auto-summary

 

to all your routers. But even then you won't the see routes in the routing table, because your static routes have a lower administrative distance and take precedence. Remove all static routes and just use RIP as described above.

View solution in original post

5 REPLIES 5
Georg Pauwen
VIP Master

Hello,

 

are you running RIPv2 ?

 

router rip

--> version 2

 

?

 

Otherwise, post the zipped Packet Tracer project (.pkt) file here as an attachment...

Reply to Georg Pauwen

 

I am not use RIP v2. I have attached the zip file here. Thank you

Hello,

 

I don't see any networks announced under the RIP process. You need to add:

 

router rip

version 2

network 33.0.0.0

no auto-summary

 

to all your routers. But even then you won't the see routes in the routing table, because your static routes have a lower administrative distance and take precedence. Remove all static routes and just use RIP as described above.

Thank you!! I solved the problem.

Reply to Georg Pauwen

I am not use RIP v2. I have attached the zip file here. Thank you